Jump to content
SAU Community

Recommended Posts

Hey guys,

Well, I've decided that this year I'm going to stop 'talking' about doing something to my R33 and actually 'do' something to it... So first is first, the engine. I've been told, but I'm not 100% positive that it would work...

The plan so far is...

40 thou oversized pistons

'H' Beam rods

R33 RB26 crankshaft

JUN oil pump

New Water pump

Bigger oil sump

Garrett GT35/40

Front-Facing plenium

Bigger throttle body

Headwork to suit with decent size cams.

That's the basics so far... I've been told and read that this plan should work, however I've also been told and read online that the RB26 crank doesn't fit. Any help would be awesome. I'm not after Horsepower Hero status, I just want a gutsy road car I can have fun on the track with.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/
Share on other sites

what about just do the turbo, ECU, injectors, fuel pump, wait for the engine to break and then rebuild???

I wouldnt worry about using a 26 crank, if your not after horsepower hero status...

Why do you want a bigger throttle body?

bigger oil sump, do you have an oil cooler as yet?

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5611980
Share on other sites

Hey guys,

Well, I've decided that this year I'm going to stop 'talking' about doing something to my R33 and actually 'do' something to it... So first is first, the engine. I've been told, but I'm not 100% positive that it would work...

The plan so far is...

40 thou oversized pistons

'H' Beam rods

R33 RB26 crankshaft

JUN oil pump - Check out the Nitto Oil Pump, cheaper and flows the same or better then the Jun, and it's Australian.

New Water pump

Bigger oil sump

Garrett GT35/40

Front-Facing plenium

Bigger throttle body

Headwork to suit with decent size cams.

That's the basics so far... I've been told and read that this plan should work, however I've also been told and read online that the RB26 crank doesn't fit. Any help would be awesome. I'm not after Horsepower Hero status, I just want a gutsy road car I can have fun on the track with.

Thanks.

Yes it does fit, I am going down the same path later this year. I have a R34 GTR crank, and I need to buy RB26 pistons (going 20 thou, 86.5mm) and some forged con rods. The RB25 and RB26 blocks are very similar, the major difference is the stroke of the RB26 over the RB25.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612038
Share on other sites

At the moment the only things the ol'girl has is a 3 inch exhaust from the cat-back, boost 'T', coilovers and mags... I only put the coilovers and mags on it. I'm buying a seperate engine and everything I need in the next few months. I just want a safe-going, gutsy engine.

Thanks for the information, Aberax. Is there anything specific I need to do to make it all work out, crank wise?

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612187
Share on other sites

Only important if you need them - plenty have not required them for over 350rwkw.

Rob - what is the budget/plan/use of the car etc?

A 3540 isn't the best choice for a street car in all honesty, no do you need to spend the extra on rods etc.

The parts list is a bit all over the place. Lots of stuff you need isn't on there, lots of stuff you don't need is...

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612214
Share on other sites

2.6 and 2.5 blocks are the same . thats why rb25det blocks have 2 oil feed lugs cast into them

rb26 has longer stroke and lower piston crown height

so if your using a 26 crank you need pistons for a 26

con rods are same dimesion

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612218
Share on other sites

The plan is to have a nice cruiser that I can go to the track and thrash around without worrying a lot about something major to go faulty. That's why I want to strengthen as much as I can. I plan on working the heads and having stronger valves and springs too. 35/40 just seemed to be a good choice for the track/strip but I'm open for suggestions.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612403
Share on other sites

Rob, Check these links out

SAU Topic - Garrett GTX Turbos

Garrett Website - GTX3076

There relatively new but look like a good thing. I just think you will be disapointed with the 35/40 in comparison to something like these. But hey its up to you.

If your not doing anything tomorrow give me a txt

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612445
Share on other sites

The results from the GTX so far have not proved they are better at all... More power but more lag; who would have thought?!

Go with what is proven to work you don't need expensive fancy parts to go fast.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612486
Share on other sites

I think your parts list is good, you need rb26 pistons with the rb26 crank. I would get premium valve springs supertec/tomei.The nitto pump is fine. Probably better than the Jun.

Edited by WHITE gtt
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612511
Share on other sites

Only important if you need them - plenty have not required them for over 350rwkw.

Rob - what is the budget/plan/use of the car etc?

A 3540 isn't the best choice for a street car in all honesty, no do you need to spend the extra on rods etc.

The parts list is a bit all over the place. Lots of stuff you need isn't on there, lots of stuff you don't need is...

This! What is your budget? Your looking at an easy 10-15k plus the headwork and parts for the head.

So let's say 20k-ish plus because you have to buy all the parts including the turbo. Still keen?

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5613249
Share on other sites

At the moment the only things the ol'girl has is a 3 inch exhaust from the cat-back, boost 'T', coilovers and mags... I only put the coilovers and mags on it. I'm buying a seperate engine and everything I need in the next few months. I just want a safe-going, gutsy engine.

Thanks for the information, Aberax. Is there anything specific I need to do to make it all work out, crank wise?

Have everything machined, cleaned and balanced correctly. Have your block decked, bored, honed, also have the main tunnel machined, good bearings ACL (I am going 20 Thou RB25 ACL Bearings), acid dipped. Get the Crank grub-screwed, cleaned and balanced along with your conrods and pistons (as they all are apart of the rotating mass). Make sure the clearances for rings, piston to bore are within tolerances, bearing crush is within aswell.

Crank, depending on how big the oil drive is, you may want to get a oil collar installed too. Also look into doing some oil control too.

A engine build is never really "cheap", I have done a rough calculation for my build, parts alone are around the $10k mark, then machine shop cost on top.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5613402
Share on other sites

Money isn't a problem for me at all. The Fiance and I have an agreement that we're not getting married until my car is done... So she is helping me out as much as she can too, haha. ;)

Thanks guys, this means a lot. I'll make sure I keep updating when I start working on it. Keep you guys in-check with the progress. :)

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5613537
Share on other sites

Money isn't a problem for me at all. The Fiance and I have an agreement that we're not getting married until my car is done... So she is helping me out as much as she can too, haha. ;)

Thanks guys, this means a lot. I'll make sure I keep updating when I start working on it. Keep you guys in-check with the progress. :)

Lol then Godspeed buddy.

Make a project thread ;)

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5613878
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...