Jump to content
SAU Community

Recommended Posts

Who (like me) is a full time slave and works 9-5 mon to fri?

If you do... where and when do you find the time to get mods / tuning for ya beast???...assuming that its your daily driver.

Asking because my room is filling up with bits and pieces to go onto the car and I will have to rock up late for work if I take my car into a garage in the morning and then catch public transport to work...

Any garages open on the weekend?

Link to comment
https://www.sau.com.au/forums/topic/34928-q-for-the-full-time-workers-in-vic/
Share on other sites

Who (like me) is a full time slave and works 9-5 mon to fri?

If you do... where and when do you find the time to get mods / tuning for ya beast???...assuming that its your daily driver.

Asking because my room is filling up with bits and pieces to go onto the car and I will have to rock up late for work if I take my car into a garage in the morning and then catch public transport to work...

Any garages open on the weekend?

I think what you mean is how do you find time to do ANYTHING during the week? Luckily for me, the team I work in cover 8am to 6:30pm so there's a bit of room to move if you need to.

I work full time Mon-Fri but luckily for me, I own part of the workshop and my car spends most of it's life there....

We are open on weekends or open late by appointment.

Give us a call on 9512-7591 and you'll speak to Gerald or Nigel who can organise a time to help you out.

I just take half a day off/ full day off whenever i need to get anything done on car as i am a contractor i can take time off whenever i like. My gfriend lives near me and works in the city also, so i catch a ride in with her if necessary.

Nick y didnt u show up for the skid pad day on sunday? u wasted $50 deposit

Yeah its sucky when are either  

- using your car as a daily driver  

- or if u are stuck interstate during the week

Fark how do you get sound systems and car mods put on *#%@

Just need a garage at home w/ lighting and good motivation. When i was working 8:30-5:30 I got quite a few things done like install a stereo, servicing, etc. That hour for lunch to pick up stuff can be invaluable!! You also gotta pass up the getting so smacked on the weekends, you lose half your most valuable part of the week feeling like your head is about to explode. Once i did that I had heaps better time management, but it was never easy i guess.

I did a lot of the work servicing my car, servicing, etc in the dark during winter in non-daylight savings. Was a bitch, but one of them "lights on a stick" and a 20m extension cable can be invalueable.

9am - 5pm, what job is that, i want that... hahaha?

Well, IcePerformance, Revzone and Racepace all do saturdays i believe, that's where i'm taking mine.

It is hard though, cos you want to enjoy driving the car on the weekends rather than having it spend half the time in the workshop.

I just take half a day off/ full day off whenever i need to get anything done on car as i am a contractor i can take time off whenever i like. My gfriend lives near me and works in the city also, so i catch a ride in with her if necessary.

Nick y didnt u show up for the skid pad day on sunday? u wasted $50 deposit

I think because he's lost his license?

I met him tonight, took a mate to drop some springs off for him :)

I dont think there is one performance shop i know of... that isnt open Saturday until midday.

So Sat man. I usually do mine then.

Or just get a day off work. Or even half a day.

Cant be there hard

I have "Speed Technology" (or EFI Hardware) accross the road from me, and sometimes they park cars in our factory so they help me out.....

Nothing like seeing off the meter cars all day, like old 260Z with 350 chevs and 280z with RB26Detts!!!!

YAY

Im lucky that Ice are located 5 mins from my work so I can drop my car off and get someone from work to come with me and bring me back - drop me off again. Most companies will give you 1/2 hr leaveway here and there anyways for things like this. Everyone has to get their cars serviced.

I just take half a day off/ full day off whenever i need to get anything done on car as i am a contractor i can take time off whenever i like. My gfriend lives near me and works in the city also, so i catch a ride in with her if necessary.

Nick y didnt u show up for the skid pad day on sunday? u wasted $50 deposit

...ummm I think you have the wrong Nick... I'm not driving anywhere at the moment;)

I haven't been to any cruises or anything yet... my car is still far too stock for my liking... but not for long...

Yeah Ferni that was me you visited last night... In ya new GTR... lucky bastard

:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...