Jump to content
SAU Community

Recommended Posts

Hey guys,

Unfortunately my car has developed an exhaust leak today, and it has gotten louder over the day and the car has become very sluggish.

Its not the normal high pitched squeal and I have checked the turbo and when I turn the car off I can hear the turbo spinning freely without any problems so I know the turbo is fine.

I have an external gate welded on the back of the turbo, but have felt around the weld for air/sound and it is fine.

The best way to describe the sound is like an unmuffled exhaust, as in no exhaust at all, just not as loud.

I have put soapy water and normal water all around the manifold and cant see any bubbles, my guess is its at the back/bottom of the manifold.

Later tonight when it has cooled down I will get under the car and see if I can see/hear anything further.

question:

Where in the Eastern suburbs can I get it checked/repaired? I was thinking Performance Exhaust in Ringwood, any other suggestions?

Thanks, Adam

Link to comment
https://www.sau.com.au/forums/topic/349702-exhaust-leak/
Share on other sites

Got under there last night, found this, sprayed it with soapy water and i was blowing lots of bubbles, so I was spot on.

post-36975-0-53380800-1294645469_thumb.jpg

Went to performance exhaust today, Dave was very honest and admitted 1. They can't weld cast - or atleast it would not hold for long. 2. they can't weld upside down, so the whole manifold would have to be taken off.

Now sourcing parts, getting a fancy gasket and other bits from the states from the recommendation of Dr drift.

If anyone has a R33 Turbo exhaust manifold in good cond please let me know :)

Thanks very much for the help guys.

Link to comment
https://www.sau.com.au/forums/topic/349702-exhaust-leak/#findComment-5618441
Share on other sites

Whats your exhaust like - seems that the weight/heat combo has caused a crack.

Very rare to see a manifold crack like that.

Ensure you change all the manifold studs as well. Likely 2-3 will break when taking the manifold off anyway

Link to comment
https://www.sau.com.au/forums/topic/349702-exhaust-leak/#findComment-5618495
Share on other sites

well, I did try one of those heat wraps, pain in the ass and F*ing itchy to put on, pretty much useless, took it off to find this crack with a stanly knife, never putting anything like that rubbish on the car again.

So the crack did form with the exhaust wrap on, had it wrapped for about 6 weeks, still I find it hard to believe it cracked....

the only other thing I can think of is that because of the small .63 bum on the turbo and 19psi? I did have that thread awhile back about the extremely hot intake and that going the 0.8x housing would allow more flow and stop the turbo heating up?

is that maybe something I should look into to stop this happening again?

The exhaust is very comfortable on the back of the turbo, not stretching or pushing into it when it sits freely - about 2mm off the turbo. front/dump pipe does have a flexy join in it to reduce tension even further and the momo course cat back.

oh and I anticipate I will have to call the thread doc out :)

Link to comment
https://www.sau.com.au/forums/topic/349702-exhaust-leak/#findComment-5618671
Share on other sites

Mate I changed my manifold 3 times in 2010. It's not all that hard, just a pain in the bum.

Coat all the nuts in wd40, wait an hour, coat them again. Let it sit for an hour or so, then have a go at them.

You will be able to get a manifold from the wreckers (osaka imports) $100-140 + nissan mani gasket $110 (kudos motorsport) + turbo gasket & crush washers $50 (kudos motorsport).

My first one.

P1620_09-10-09_small.jpg

Link to comment
https://www.sau.com.au/forums/topic/349702-exhaust-leak/#findComment-5619136
Share on other sites

I know its not that hard to change, just a pain. If the heatwrap can cause this that would be a bit of a relief so that at least i know my actual setup isn't causing this...

that crack is massive, what was the cause?

I called osaka imports, $120 for the manifold, Sam will get one for a lot cheaper if I cant find one for 50-70 bucks in the mean time on here.

Link to comment
https://www.sau.com.au/forums/topic/349702-exhaust-leak/#findComment-5619175
Share on other sites

The dump was heat wrapped for that one and running the standard r33 turbo @ 12psi.

The other two didnt crack, just warped with no wrapped at all and 21U highflow @ 14psi. In saying that

the car sees only track work.

When you pull the mani off, make sure the exhaust housing is still flat.

01082010160.jpg

Link to comment
https://www.sau.com.au/forums/topic/349702-exhaust-leak/#findComment-5620302
Share on other sites

Got the manifold off and the studs out... unfortunately 2 broke in the block but i'll get in contact with the thread doc.

I'd like to mention how much easier wd40 made getting the nuts off, I sprayed it in the morning before work and they looked all rusty, by the time i got home that night they looked shiny again and all came off fairly effortlessly.

my next question: When i get my new manifold, where can I get it heat coated, does it improve engine bay temps/prevent cracking and how much does it cost roughly?

post-36975-0-98837500-1295044952_thumb.jpg its more then I thought, that crack goes right in there. I have checked flanges with a metal ruler and they are perfect.

Adam

Link to comment
https://www.sau.com.au/forums/topic/349702-exhaust-leak/#findComment-5625692
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...