Jump to content
SAU Community

Dyno Comparo - Various Twins Rb26

R31Nismoid

By R31Nismoid,
in Engines & Forced Induction

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

How come the one with -9s has boost control issues?

I'm curious on how -9s with boost control issue fixed would stack up compare to -7s in terms of response.

Don't know. Mate of mine said mine was quite a bit more responsive than his, given our turbos are similar, we now know why.

No doubt he'll get it fixed eventually. Could be 100 things.

adzR34 Collaborator

adzR34

Posted
Posted

Ash, great effort on the comparo this is exactly what makes this site useful.

I'm looking for turbos at this stage and your turbos seem very appealing, theyre more responsive and overpower the 9s. Boost issues aside, the 9s seem to be behind these hybrids by some way.

Do you know if race pace will be selling these offshelf?

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

Don't know. Mate of mine said mine was quite a bit more responsive than his, given our turbos are similar, we now know why.

No doubt he'll get it fixed eventually. Could be 100 things.

With a GTR, it's more like 10,000 things!

Yeah yours look as responsive as, wouldn't mind having a ride in it.

I'm curious on -9s being bit laggier than -7 from my exprience, it's the other way. But I'm comparing 302rwkw GT-SS to 270rwkw R34 N1 with EBC, but I'm comparing apple with orange here.

R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

All I know so far is they are 4 GT2860's made into 2.

Given Garrett don't sell the wheels separate to the cartridge for that series... So it gets very expensive quite quickly.

When I find out more I'll update.

bigmikespec Veteran

bigmikespec

Posted
Posted

Garrett don't sell separate but you can get individual parts for Garrett turbos elsewhere.

SimonR32 would be interested to see your old T04Z graph I know it is a twins thread but just for comparisons sake as you had it pretty sussed out. Or maybe the thread should stay on topic a bit longer :)

SimonR32 Grand Master

SimonR32

Posted
Posted

Garrett don't sell separate but you can get individual parts for Garrett turbos elsewhere.

SimonR32 would be interested to see your old T04Z graph I know it is a twins thread but just for comparisons sake as you had it pretty sussed out. Or maybe the thread should stay on topic a bit longer :)

Similar to the 517z's up to about 120 then ramps hard and monsters everything... But yes stick to low mounts for now :)

Snowman Grand Master

Snowman

Posted
Posted

I discounted this because it had the better motor, but still same turbos :)

Really the major difference between the 2 is the amount of boost they are running.

Either way - they were both good track set-ups thats for sure. For everything else I'd prefer Ash's one.

  • 1 year later...
RB2600 Rising Star

RB2600

Posted
Posted

All I know so far is they are 4 GT2860's made into 2.

Given Garrett don't sell the wheels separate to the cartridge for that series... So it gets very expensive quite quickly.

When I find out more I'll update.

Apologies for the MAJOR thread revival, but I don't think anything else has been mentioned about these Racepace Hybrid turbos on this forum according to what my search results are showing.

Was the EBC eventually installed to see if there was any difference? (especially after the boost curve of this setup crosses over with the -7 setup, if it were able to at least maintain 19psi like the -7, that would be interesting to see)

Was there any further development into this setup?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...