Jump to content
SAU Community

Recommended Posts

how much power are you planning on making? and on which fuel?

I would be really happy to get about 300kw at the wheels and be running premium fuel. My motor has been fully rebuilt, i have adjustable timing gears, bigger fuel pump and im about to upgrade my turbo. I just want a slightly bigger injector than standard. I have an R33 GTST with an RB25DET in it.

555cc if you go a 3071 or smaller

740cc if you go a 3076 or larger

740cc minimum if you are going to run e85

1000cc if you want to shoot for more power on e85 later on

555cc if you go a 3071 or smaller

740cc if you go a 3076 or larger

740cc minimum if you are going to run e85

1000cc if you want to shoot for more power on e85 later on

thanks thats what i needed to hear

get ones with a decent spray pattern as well, don't just look at the cc rating.

Which ones have good spray patterns then?

I mean i got these sard dual spray ones (designed for JZ engines) that dont seem to have a spray pattern really they just shoot 2 huge jets of fuel out, have read somewhere they can spray into the walls on RBs ..Dunno if thats any good or not but they work ok..Definately can supply a heap of fuel..

Edited by Arthur T3

I wouldn't know to be honest, I haven't been injector shopping yet. But I do know that there is an appreciable difference between cheap and good ones.

Start googling for reviews and tech articles, that is what I would be doing.

Edited by Rolls

I wouldn't know to be honest, I haven't been injector shopping yet. But I do know that there is an appreciable difference between cheap and good ones.

Start googling for reviews and tech articles, that is what I would be doing.

Not to worry, I did some googling when i got them but didnt find alot, they're already in the car and working fine, if they stop working then i will worry.. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...