Jump to content
SAU Community

Recommended Posts

how much power are you planning on making? and on which fuel?

I would be really happy to get about 300kw at the wheels and be running premium fuel. My motor has been fully rebuilt, i have adjustable timing gears, bigger fuel pump and im about to upgrade my turbo. I just want a slightly bigger injector than standard. I have an R33 GTST with an RB25DET in it.

555cc if you go a 3071 or smaller

740cc if you go a 3076 or larger

740cc minimum if you are going to run e85

1000cc if you want to shoot for more power on e85 later on

555cc if you go a 3071 or smaller

740cc if you go a 3076 or larger

740cc minimum if you are going to run e85

1000cc if you want to shoot for more power on e85 later on

thanks thats what i needed to hear

get ones with a decent spray pattern as well, don't just look at the cc rating.

Which ones have good spray patterns then?

I mean i got these sard dual spray ones (designed for JZ engines) that dont seem to have a spray pattern really they just shoot 2 huge jets of fuel out, have read somewhere they can spray into the walls on RBs ..Dunno if thats any good or not but they work ok..Definately can supply a heap of fuel..

Edited by Arthur T3

I wouldn't know to be honest, I haven't been injector shopping yet. But I do know that there is an appreciable difference between cheap and good ones.

Start googling for reviews and tech articles, that is what I would be doing.

Edited by Rolls

I wouldn't know to be honest, I haven't been injector shopping yet. But I do know that there is an appreciable difference between cheap and good ones.

Start googling for reviews and tech articles, that is what I would be doing.

Not to worry, I did some googling when i got them but didnt find alot, they're already in the car and working fine, if they stop working then i will worry.. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...