Jump to content
SAU Community

Where Do I Find Out About Texi Etc In Canberra?

a20089

By a20089,
in Australian Capital Territory

 Share

Recommended Posts

Shell Grand Master

Shell

Posted
Posted

Just FYI.... the first Texi in Sydney is June 12, and it's only $30 if it's your first time with us.

It's not *too* much of a shitful drive from here as Quakers Hill is just off the M7.

Factory 5 Mentor

Factory 5

Posted
Posted

should be fine, how much power do you have?

Smoke-worthy power?

Im not sure, would be 140kw at the rears (ish) and about 390nM torque.

Enough for a 400m speed of 189km/h

Might bring a few sets of spares to see what gives good grip.

Melly Grand Master

Melly

Posted
Posted

Hopefully I will have Pinky back on the road for the April local Motorkhana.. If all goes well, got my side indicators half installed, new mirrors on, will have my front indicators soon then get the front bar fitted and sprayed and all ready to go!

Factory 5 Mentor

Factory 5

Posted
Posted

more details on the cressie kthx

Bought it as a finished project, built for daily duties and long cruises. Came with a trailer load of spares, literally.

When its washed up a bit I'll get some pics and maybe a mini-build/ fix it diary thread.

Currently waiting on the USA for cool-flex radiator hose couplers. (1.3/8" rubber joiners for the custom rad hoses)

So its not running.... missed very much too. The Holden Cruze/Ignis just doesnt do it for me :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...