Jump to content
SAU Community

Recommended Posts

Well for the past 2 weeks I been @ TAFE doing some modules for my apprenticeship....

Anyway on the last day (Friday), my car was not only badged - but my mags that wer eon he car when I brought it had alloys screw caps + rings to hide the wheel nuts etc - they took 2 of these off. Apparently they can't be replaced :D

****ing losers that go to TAFE! All ****ing deadshit...

NOTE: No offence to anyone here who goes to TAFE - but all the people here seem to be dead shits only going to colelct some benefits!

Now I need to buy some new mags + badges ;)

Link to comment
https://www.sau.com.au/forums/topic/35295-homos-tafe-ed-me-over/
Share on other sites

Had both of my 33's badged on sat nite in my driveway. At least they didn't take the impul centres but I am fuming.

Wonderig if it isn't the c**ksucking loser down the street who just has to do burnouts past my place in his 32 all the time. Nice car...f**kwit driver. Anyway I'll have my eye on him and his mates.

What the hell do they get from taking badges anyway? I couldn't be arsed replacing them until i maybe get around to selling, but that is a long way off.

Nice generalisation about tafe there guys.

While im sorry to hear about gattys misfortunate just bear in mind not every tafe is plagued with the low lifes spoken of here.

I have completed diplomas and other qualifications at a northern suburbs campus of tafe over the past few years and parked my modified 200sx, GTS-T and R33 GTR there and NEVER had any concern at all.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...