Jump to content
SAU Community

Recommended Posts

lol, rate it :)

How did the big dive up the inside go @ 35 seconds? It was chopped :D I think I know why......

From memory the GT3 was posting lap times around the 1min 18 mark. Good drive but wouldn't let faster traffic through which was a pain. The first time I went to get passed was the "big drive up the inside @ 35 secs", it wasn't pretty.... :whistling: 2nd attempt to get passed was a lap later also on the entry into a hairpin which went to plan.

Cheers

Slip.

Typical Dak Dak driver..... many of them seem to remove their rear vision mirrors because they think they're the fastest ever. :P

There is no wanker like a Porsche wanker.....trust me I should know :)

Actually Ferrari wankers are kind of the best - red Schuie suits with matching Puma booties and a 10 second off the pace lap time. Thats where its at Maranello style :)

There is no wanker like a Porsche wanker.....trust me I should know :)

Actually Ferrari wankers are kind of the best - red Schuie suits with matching Puma booties and a 10 second off the pace lap time. Thats where its at Maranello style :)

The Porshe guys are (typically) pretty bad, I've got much video footage to prove it :) AND the cracked widscreens!

But yeah, Ferrari guys are the worst! I'm yet to see one driven properly. lol

Thats just a classic. Well they always say if you dont fly off the track at some

stage you are just not trying hard enough. Welcome to the hard club Seb!!!

Good effort. BTW - do we get to see the rest of that footage soon.

As production designer I demand it...............

Congrats on the 13s mate - I knew you had it in you.

I'll look forward to getting out there and rubbing door handles with you soon.

Martin, you must be pleased to see this weapon out there pulling the times.

I will have to join the porsche club - looks like a lot of fun.

Willall racing at the porsche day. 1 2 and 3. Domination. I like that.

Maybe they should call it - Come out and get thrashed by a Nissan GTR day!

hahaha

Did they give you a talking to for passing under brakes Seb? I know that GT3 RS and it's not exactly standard as well!

I wasn't passing, just taking the better line... :whistling: Trailer part II is going up.

http://www.youtube.com/watch?v=tWQIc-i4PXg

Cheers

Slip.

lol, very funny. :)

but if you think we have it bad here with porsche wankers you should try going to a track day in europe or even go to a nurburgring tourist session. nothing like putting around in your rental race car with say 250hp only to have a gaggle of 4 GT3RS's all pass you at once like they are fighting over an F1 grid spot as they blast through the fast uphill section at 280+ only to find you up there arse as soon as the track gets a little sliperry or though anything that requires hitting a few apexes. and the sheer numbers of them! nearly every bloke in germany must have a GT3RS. went to a private track day at Spa F1 circuit in belgium and it was like driving your way through a plauge of porsches. and yes the ferrari guys are worse but thankfully few and far between.

PS, I'm not saying all porsche owners are wankers. just that the wanky ones are wankers. and yes I'm jealous and will happily accept any GT3 RS thrown my way and join those manly bavarians and it up around europe. call me Hans.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...