Jump to content
SAU Community

Recommended Posts

Hello Hello

This is my baby and I have owned it for almost on a year. I am looking at starting a new business and therefore this weapon needs to go so I can free up some funds. This is a 1995 V-Spec with 66,000km and has been stripped of all luxuries and is a perfect blend of street and track in every way.

The car is fully engineered and mod-plated for the rollcage, seats, harnesses, turbo, intercooler and big brake conversion meaning that whoever buys this will not get hassled by the cops as I have made sure everything is legal - I have all paperwork and certification supporting this as well and comes with the car together with a lovely blue mod-plate sitting fixed to the engine bay. The car made 400hp at the wheels on 20psi on street tune but is capable of well more as it was wound down from 23psi making 480hp at the wheels and has much more available from the current setup - I also have dyno sheets to back up these figures. Car comes with all receipts for majority of mods listed and a full box of removed parts such as stock dash and air con system.

• High Performance Imports mag feature car!!!

• N1 forged pistons and rings

• HKS cams gears,

• 600cc injectors,

• 2x Garrett N1 turbos rebuilt and high-flowed with dual ball bearing centres currently running 20psi

• PWR front mount intercooler,

• Turbosmart boost controller,

• GFB bov,

• A'pexi twin pod filter assembly (new no pics)

• Apexi PowerFC,

• 4 inch stainless steel exhaust from turbo back ending in twin 4inch custom cannons,

• Water spray system to intercooler and radiator,

• Drummond suspension (fully adjustable),

• Heavy duty clutch,

• OS Giken heavy duty close cut gearbox,

• Double cross over roll cage

• Fire bomb fire extinguisher system integrated into cabin and engine with control switch,

• R-Spec brakes with floating discs,

• Carbon fibre rear wing,

• Series 3 GTR front lip,

• 2x rally Sparco Pro 2000 racing seats with 2x Willans 5 point racing harnesses,

• Nismo 320kph dash cluster,

• Sparco steering wheel,

• Kenwood cd player and speakers,

• Killswitch pull tag system,

• T5 tinted windows,

• HICAS eliminator

• Braded lines everywhere

• VOLK GT-C 19 x 10.5 +21 wheels with Bridgestone RE-01 Semi-Slicks

• Clear front bar indicators

• Clear Tinted side indicators

And much more which im sure I have not thought of.....

I am asking $30,000 ONO and would prefer a straight tsale rather than a swap but would consider a swap if it was something I couldnt refuse.

I dont really know what else to tell you about it but if you have any questions please call me on 0405 382 754 - car is located in Brisbane.

Regards

HIMMY

post-71783-0-24016200-1297050870_thumb.jpg

post-71783-0-23560900-1297050886_thumb.jpg

post-71783-0-55572800-1297050900_thumb.jpg

post-71783-0-35957600-1297050913_thumb.jpg

post-71783-0-74245800-1297050924_thumb.jpg

post-71783-0-28840300-1297050935_thumb.jpg

post-71783-0-50609400-1297050945_thumb.jpg

post-71783-0-26981000-1297050954_thumb.jpg

post-71783-0-89065300-1297050966_thumb.jpg

post-71783-0-05510300-1297050983_thumb.jpg

post-71783-0-48433000-1297050999_thumb.jpg

post-71783-0-13890700-1297051012_thumb.jpg

post-71783-0-85956500-1297051022_thumb.jpg

post-71783-0-88897200-1297051046_thumb.jpg

post-71783-0-02579600-1297051063_thumb.jpg

Edited by HIMMY
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/353119-beautiful-streettrack-r33-gtr/
Share on other sites

hey mate beautiful car just wondering how you got around the catch tank venting to air? i know our local coppers would be straight onto this as its not sealed/resuculated.

Edited by johnbarry88
  • Like 2
  • Nope 1

hey mate beautiful car just wondering how you got around the catch tank venting to air? i know our local coppers would be straight onto this as its not sealed/resuculated.

hey man I was playing with the little plus and minus sign on the bottom of your post and clicked minus wondering what it did and it said -1 reputation - SORRY THATS A MISTAKE I WAS CHECKING WHAT THE BUTTON DID AND I CANT UNCHECK IT LOL APOLOGIES :worship:

Now on topic....that was done by previous owner and I had QLD transport check the car and they approved everything so as far as my experience goes I didnt have any troubles. I dont drive like a lunatic so cops dont really bother me.

Its a simple thing to seal and recirculate though if someone was concerned about it.......

Thanks and apologies again my bad...

HIMMY

Now on topic....that was done by previous owner and I had QLD transport check the car and they approved everything so as far as my experience goes I didnt have any troubles. I dont drive like a lunatic so cops dont really bother me.

Don't normally post in these threads, but when sellers claim that qld transport approved everything, i feel the need to ask:

1. how did sparco fixed back seats get approved/mod plated as they do not come with an adr rating, and in my experience cannot be mod plated for roadworthy use.

2. catch can venting to air is def not road worth, even with a filter attached to it.

3. side intrusion bars, in my experience, are not able to get mod plated for a roadworthy

op, if you do have a mod plate for these items, please post a pic as i coulndn't see it in the engine shots and congratulations, as i have not been able to get similar mods approved and i apologize, and i will happily edit out this post.

you may also want to post paperwork supporting 66000kms on the chasis, as that woudl make this a valuable low k investment

Edited by PWND
  • Like 1
  • Nope 1

Don't normally post in these threads, but when sellers claim that qld transport approved everything, i feel the need to ask:

1. how did sparco fixed back seats get approved/mod plated as they do not come with an adr rating, and in my experience cannot be mod plated for roadworthy use.

2. catch can venting to air is def not road worth, even with a filter attached to it.

3. side intrusion bars, in my experience, are not able to get mod plated for a roadworthy

op, if you do have a mod plate for these items, please post a pic as i coulndn't see it in the engine shots and congratulations, as i have not been able to get similar mods approved and i apologize, and i will happily edit out this post.

you may also want to post paperwork supporting 66000kms on the chasis, as that woudl make this a valuable low k investment

I have all that informationchamp and I will get onto it for you sir with pics over the weekend

The engine bay pics posted are old ones as since those pics I have had an Apexi pod filter setup installed and the mod-plate affixed with attached paperwork in glovebox. Will post new pics on weekend.

I dont have paperwork to support the kms BUTTTT the car is a 1995 model imported in 1997 and original dash taken out which I still have with me and it shows 26,XXX kms and the current Nismo dash which reads 40,XXX kms = 66,XXX kms to me :thumbsup: also can post pics of both to keep you happy....

So new pics to come along with dyno sheet pics as well....to keep everyone else happy......

I sat at Qld ransport for 45 mins while they looked over everything after i got it engineered and then gave me a big smile and said "have fun mate"........

Any other questions HIT ME!!

The new owner will not be disappointed.....

Hello...

As requested.......

DYNO SHEET

post-71783-0-54773500-1297483788_thumb.jpg

MOD CERTIFICATION

post-71783-0-41833700-1297483798_thumb.jpg

MOD PLATE

post-71783-0-16489300-1297483814_thumb.jpg

PROOF ITS IN THE ENGINE BAY

post-71783-0-42823300-1297483831_thumb.jpg

HAPPY????

Cheers

Himmy

Edited by HIMMY

Honda NSX or a R34GTR.........but very open to any swap offer with cash either way...

Thats the dream.....anyway....if anyone has either im keen on looking into a cash adjustment....

HIMMY

Edited by HIMMY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...