Jump to content
SAU Community

Recommended Posts

OK So First DECA for the year....March 19th

And as per usual no volunteers to help us for the day means we cannot run the day.

So we are calling for your assistance - if you're willing to help, or if you're bringing a friend/partner who's willing to help - please speak up.

We can explain what you need to do if you haven't done it before, so don't stress about that.

It is VERY easy stuff and you will get a great view of the action!!

(very good for you budding photographers)

All officials will be given a free lunch and water during the day.

We also need all officials to be at DECA by 8.00am on Saturday morning - same time as competitors.

We will be organizing Volunteers prior to the Drivers Briefing.

Until all slots are filled, Drivers briefing will NOT go ahead and the event will not start.

I know it sounds harsh but without these people we cannot run the event.

Please PM me if you are able to help out. Even if just for 1/2 a day.

Thanks Heaps

Martin

Morning

Long Wang

Starter - hayley

Finisher/Timer FEMINO

Flag point 1 -sanjay

Flag point 2 – ???????

Mini Wang

Starter - Anna

Finisher/Timer (2) - ?????????/

Skidpan

Timer jett

Hat Removalist - Juliette

starter - Wayne

...........................................................

Afternoon

Skidpan

Starter - Wayne

Timer 1 -???????

Timer 2 -???????

Time Recorder - ???????

Hat Removalist -???????

Hat Removalist -???????

Look forward to seeing you all there an having a fun day.

Link to comment
https://www.sau.com.au/forums/topic/353404-deca-helpers/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

I still reckon volunteers should receive priority entry into the next DECA if they wish. You'd probably get a lot of people who miss out instead come up for the day to watch, and volunteer so they don't miss the next one.

Link to comment
https://www.sau.com.au/forums/topic/353404-deca-helpers/#findComment-5673187
Share on other sites

Everytime i come down i help out where possible, generally the skidpan in the afternoon.

Its dead easy to help out and still have a go, just get whoever runs before you to do your job for your run then swap back :)

Good idea Kieran

Link to comment
https://www.sau.com.au/forums/topic/353404-deca-helpers/#findComment-5673200
Share on other sites

I still reckon volunteers should receive priority entry into the next DECA if they wish. You'd probably get a lot of people who miss out instead come up for the day to watch, and volunteer so they don't miss the next one.

This was tried in the past and was not taken up by many people.

thus was discontinued (hard to have a priority list for something like this.)

WE more often get partners/ friends those that want to compete usually enter or don't turn up.

Happy to discuss bringing this back if there is enough interest.

Link to comment
https://www.sau.com.au/forums/topic/353404-deca-helpers/#findComment-5673219
Share on other sites

This was tried in the past and was not taken up by many people.

thus was discontinued (hard to have a priority list for something like this.)

WE more often get partners/ friends those that want to compete usually enter or don't turn up.

Happy to discuss bringing this back if there is enough interest.

Just make it simple. If they're there on the day and assist, when the accommodation thread for the next DECA rocks up any volunteers from the last DECA are able to reserve a place in that same thread. They can't pay or fill out forms till the official thread and forms are available, but their name appears on the list with Ryan, Leon, Clive, etc.

If they don't reserve themselves between the accommodation thread and the official DECA thread they forfeit their priority entry and have to line up like everyone else.

If they don't pay within a couple of weeks, they get bumped off the list.

Link to comment
https://www.sau.com.au/forums/topic/353404-deca-helpers/#findComment-5673325
Share on other sites

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...