Jump to content
SAU Community

Recommended Posts

ok let me first say, that this is typically what happens to me

i changed my spark plugs today, with BCPRE ones, and i used to have BK.. somethings... and the new ones are longer by a few mm, i dont know why its relevant but id like to say every detail

i changed them over no dramas, turned the car on and i have what seems to be a lifter ticking, and i have no idea why its doing this now....

i know this is a near impossible question, but any ideas WHY?!

ok let me first say, that this is typically what happens to me

i changed my spark plugs today, with BCPRE ones, and i used to have BK.. somethings... and the new ones are longer by a few mm, i dont know why its relevant but id like to say every detail

i changed them over no dramas, turned the car on and i have what seems to be a lifter ticking, and i have no idea why its doing this now....

i know this is a near impossible question, but any ideas WHY?!

Spark plugs are most likely wrong, the contacts aren't firing properly.

change the plugs again trial & error, it may even be that the plugs aren't

positioned correctly your engine's probably running on 5 cylinders...

Spark plugs are most likely wrong, the contacts aren't firing properly.

change the plugs again trial & error, it may even be that the plugs aren't

positioned correctly your engine's probably running on 5 cylinders...

engine runs smoothly, exact same as before, i put the old plugs back in straight after, and was still ticking.

when you change your plugs, it's a good idea to use a compressor or a vaccum to blow/suck out the dirt in the valley before you pull each plug out, so dirt and crap doesnt fall into the cylinder.

anyway, i doubt that would cause ticking, unless it was a big chunky piece of something that fell in.

i changed my spark plugs today, with BCPRE ones, and i used to have BK.. somethings... and the new ones are longer by a few mm, i dont know why its relevant but id like to say every detail

The fact that nobody has commented on that worries me.

I know on SR's there are issues with particular spark plugs being slightly too long, and will hit things internally... I wouldn't be surprised if this is the case on RB's too.

Have you considered swapping your old plugs back in and seeing if the noise goes away? If it does, you've pretty much isolated the noise to those spark plugs.

He said he did try the old ones again, and the ticking was still there, but now has gone away.

Could it be possible that you simply left the car sitting, off, for a decent amount of time such that a decent amount of oil had drained to the bottom, causing noisy lifters?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...