Jump to content
SAU Community

Recommended Posts

Need to sell:

* $100 for 2x JDM S15 450/480cc injectors

* $100 for 1x drivers seat, Ghepardo, black, reclining, adjustable, new, super comfy, bottom mount but no rail

* $9000 for 1x Daewoo Nubira 4-door sedan, 29000kms only, 5spd manual 2.0Lire 4cyl economical 100kw engine, leather interior, 4wheel disc brakes, allow mags

Spalding GOLD series basketball ring portable, spring loaded!!

im selling my basketball ring, as its at my old house and theres no room at where im living now or where my house will be built, its the GOLD series which has the biggest base, biggest backboard and it just general better overall compared tot he silver and lower series, i paid $440 i think it was on special, currently the silver version is on special for $350, mine is assembled but can be slightly disassembled for a buyer ( still most prob need a ute to move) ive had it only a few months great condition will sell for $350o.n.o,

FS

2nd hand MWB brand (japanese) boss kit to suit nardi/momo steering wheels.

NOT hicas compatible - suitable for anyone who has a hicas lock bar or non hicas car.

Has a crack in the surround which had been repaired before I got it but the glue has come away from it.

$20 or trade for a few longnecks of beer

-D

Selling my Apexi Power FC AP Engineering for an RB20, bought it to put onto my Cefiro but im selling the car now so no need for it anymore.

Shoot me a PM if interested, wanting $1100, no hand controller but you can purchase them from Greenline ect

Thanks

Dirt Bike

I'm wanting to sell my '98 YZ250

Good condition

Clark fuel tank

Selling due to it only being ridden 5 or 6 times in 2 years

Looking for $1800ono Can possibly organise a test ride somewhere. Bike is Located in Gawler.

Dirt Bike

I'm wanting to sell my '98 YZ250

Good condition

Clark fuel tank

Selling due to it only being ridden 5 or 6 times in 2 years

Looking for $1800ono Can possibly organise a test ride somewhere. Bike is Located in Gawler.

hey dude any chance you could sent a pic to my inbox at all :P

Howdy guys, my DTM Rush wheels are up for sale again by the looks aha.

They are 18x9.5 +27 painted in satin black with a full set of 255/35/18 with 90 - 85% tread

I am after $1,600ono. for the whole set and beleive me when they are clean they look stunning!

Tinyest bit of rash on one of the wheels lucky to be like 3cm all up and is a really really light graze.

DayCruise019.jpg

R32GTR-7.jpg

DSC00160.jpg

Can get more pictures apon request.

Contact me via PM or ring/txt on 0433830055 :D

Wayne.

They'll hang out majorly on the front.. might need a bit of work on the rear too..

the front fenders have been replaced with massively pumped and rolled out guards, 9.5 +27 should be sweet there, would need a few good deg'z of camberz

on the back it will deffo need some massaging, but guys run 10" with similar offset without too much hassle.

but with the stud patern fit?

edit***

18x9+20 and 18x10 +18

DSC_7402.jpg

Edited by rhys5169

Man on a JZX100 18x8.5 pretty much sits flush with the front and a 9 is flush with rear. You'd need a dickload of guard work. Stud Pattern is all good. I'd suggest finding someone with similar sized wheels and test fitting before buying them.

without doing any research, can someone tell me if them rims ^^^ will bolt up t a jzx, they will fit in terms of size (maybe a little guard love) but bolt space?

my mates car with my wheels 18x9.5+15 all round and 235/40's (so stick out 12mm more than the ones you are looking at)

100_0805.jpg

100_0831.jpg

100_0827.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...