Jump to content
SAU Community

Recommended Posts

Compaq Presario CQ61-107TU Notebook PC (NW982PA)

RRP is $999. Brand spanking new in box, not even opened or touched. Ill let it go for $800, FIRM.

Specifications can be found here. http://h10010.www1.hp.com/wwpc/au/en/ho/WF...29-3938413.html

PM me or email: [email protected]

got a rb20 turbo, good condition minimal shaftplay, complete with all lines, manifold. $130

set of rb20 coilpacks with holder. good condition, will give a set of spark plugs with it that were in the car before. theyve done about 100km or so still look almost brand new, $130

Stock front and dump pipe $30

im wrecking a complete rb20 engine (just the engine, not car) so any parts needed pm me.

im after a z32 afm so any offers concidered

i dont use this much so txt me on 0428851616

hi

i have a r34 turbo for sale it has done extremely low kms and is in excellent condition has no shaft play and the r34 turbos run a nylon wheel instead of a ceramic rear wheel. the reason that im selling is due to upgrading to a HKS 2535

im asking $450 ono

dont bother pm in me coz im not on hear very often

contact me on 0408494856

imgp2945b.jpg

make an offer..

orange r32 gtst coner indicators. one clip broken.

turbosmart BOV

rb20 injectors all fine..

r32 cusco fixed front strut brace.

FET turbo timer.

need this stuff gone otherwise i will chuck it.

^^^^^pretty sure it's a nylon compressor wheel, ceramic exhaust wheel but i may be wrong and it may have a steel exhaust wheel. Definatly not a nylon exhaust wheel as it would vaporise at those temps.

For sale;

Datsun 120Y 1975 4 on the floor station wagon.

I have had this car only a short time untill a family member was done with their ute, and they are now done with the ute and now there is no need for the 120Y.

It starts first time everytime with no dramas at all, the exterior and interior is a little rough but it runs like an absolute dream no joke.

I have replaced the dizzy cap and rotor button with brand new items as it was fouling plugs but now no worries what so ever, the owner before me put a mint condition 2nd hand clutch in too.

Has a bit over a month of rego and at $26 to change over into your name its a fantastic cheap reliable daily or bush basher if you wish.

It has a pioneer CD player kenwood 6x9's in it.

Its white, has rust, but seriously runs killa.

Start it off at $500ono and we'll go from there :).

0433830055 - PM me - Wayne. Call anytime as I am currently on 'holidays'.

got a rb20 turbo, good condition minimal shaftplay, complete with all lines, manifold. $130

set of rb20 coilpacks with holder. good condition, will give a set of spark plugs with it that were in the car before. theyve done about 100km or so still look almost brand new, $130

Stock front and dump pipe $30

im wrecking a complete rb20 engine (just the engine, not car) so any parts needed pm me.

im after a z32 afm so any offers concidered

i dont use this much so txt me on 0428851616

.

.

.

more parts have been taken off the engine,

rubber intake pipe (rb20) $30

rb20 AFM $70

used pod filter, still good condition, $10

or 90bux for intake pipe, pod and afm

used exedy sports tuff clutch, not sure how much meats left on it but it ran perfect wen i had it never slipped or anything, appears in good condition. $100

still allot of parts on engine, need it gone pm me for any parts

Apexi AFC

The first one with the dials before the SAFC, II and Neo stuff

Good for minor adjustments. Not wanted anymore.

$75

I paid $100 and never used it.

PM me. First with cash wins!

A sad day has come and i am selling the Rb25 Neo Power FC and Z32 Airflow meter.

2nd Hand PFC, i have had for a while and have never had the chance to install in my car - $1600

Brand new Z32 and tomei plug Sold

For sale is my Greddy BOV type RS. Bought this couple months ago for $480 and selling it now due to an upgrade.

Comes with the box and gaskets and everything you need.

Fits R33 & R34.

Price $ 400 O.N.O

Contact me on 0421188765. Kien

post-55319-1253593209_thumb.jpg

post-55319-1253593252_thumb.jpg

Apexi AFC

The first one with the dials before the SAFC, II and Neo stuff

Good for minor adjustments. Not wanted anymore.

$75

I paid $100 and never used it.

PM me. First with cash wins!

SOLD pending payment and collection.

For sale;

Datsun 120Y 1975 4 on the floor station wagon.

I have had this car only a short time untill a family member was done with their ute, and they are now done with the ute and now there is no need for the 120Y.

It starts first time everytime with no dramas at all, the exterior and interior is a little rough but it runs like an absolute dream no joke.

I have replaced the dizzy cap and rotor button with brand new items as it was fouling plugs but now no worries what so ever, the owner before me put a mint condition 2nd hand clutch in too.

Has a bit over a month of rego and at $26 to change over into your name its a fantastic cheap reliable daily or bush basher if you wish.

It has a pioneer CD player kenwood 6x9's in it.

Its white, has rust, but seriously runs killa.

Start it off at $500ono and we'll go from there :P .

0433830055 - PM me - Wayne. Call anytime as I am currently on 'holidays'.

SOLD

I no longer require my single car garage & am selling it to build a bigger one.

It is steel frame with painted zinc sides & roof with a large panel lift up door &

a personal access door on the side. It is approx 8m long & 3.5m wide.

Buyer to remove from Property (north east of city) $350

F.S. Selling My Rims. I did get these rims off another member here but have not put the rims on my r33 yet.

Item: BBS RGR in Diamond Black + Falken FK452 9

Condition: Excellent

Price: 3.5K ono

To Fit: Skylines R32,33,34, V35, S15

18x8.5 +36 Falken FK 452 235/40/18 90%

18x9.5 +38 Falken FK 452 265/35/18 90%

just some more info from the seller i got the rims from

Genuine BBS forged wheels and rare in the present offset and widths. Retails in Japan for close to 4k wheels only not including shipping and duties. Tyres are virtually brand new which cost $1200 retail. Had them on my GTT, no guard mods needed. No gutter rash at all. Few paint chips from everyday driving. Pick up only at this stage. Price is slightly negotiable first in best dressed!

Contact:call me on 0401409575(Allan)

pics

IMG_4512.jpgIMG_5252.jpgIMG_5251.jpgIMG_5250.jpgIMG_5249.jpgIMG_5248.jpgIMG_5253.jpg

ALSO FOR SALE

For Sale - Microtech Dash Unit

Condition - Excellent condition, Brand New Never Used Complete Kit.

Price - $500 posted to anywhere in australia $495 pick-up

Location - Adelaide,SA . can post interstate.

Contact - call me on (0401409575-Allan)

Description/Info -

The Microtech Dash unit provides the driver with all important engine data on it's large,easy to read backlit screen. Also features shift light & warning lights illuminated at desired readings, all programmed with the unit itself.

This unit doubles as a handset and can be used to program the Microtech ECU and tune the car.

Instant scrolling through Data functions displaying water temp, boost, Revs etc can be done at the push of a button without taking your hands off the wheel thanks to the micro button that is included in the kit.

Kit contents include:- Head Unit, COM Cable, Micro Push button and dash mount bracket.

Pics -

this is not my pic as my dash unit has not been used just to show ya's what it look's like when it's on efi_microtech_dash.jpg

Pics of my unit -

th_100_3216.jpg th_100_3217.jpg th_100_3218.jpg

Edited by R334door(s2)

F.S. Selling My Rims. I did get these rims off another member here but have not put the rims on my r33 yet.

Item: BBS RGR in Diamond Black + Falken FK452 9

Condition: Excellent

Price change: $3300ono

To Fit: Skylines R32,33,34, V35, S15

18x8.5 +36 Falken FK 452 235/40/18 90%

18x9.5 +38 Falken FK 452 265/35/18 90%

just some more info from the seller i got the rims from

Genuine BBS forged wheels and rare in the present offset and widths. Retails in Japan for close to 4k wheels only not including shipping and duties. Tyres are virtually brand new which cost $1200 retail. Had them on my GTT, no guard mods needed. No gutter rash at all. Few paint chips from everyday driving. Pick up only at this stage. Price is slightly negotiable first in best dressed!

Contact:call me on 0401409575(Allan)

pics

IMG_4512.jpgIMG_5252.jpgIMG_5251.jpgIMG_5250.jpgIMG_5249.jpgIMG_5248.jpgIMG_5253.jpg

ALSO FOR SALE

For Sale - Microtech Dash Unit

Condition - Excellent condition, Brand New Never Used Complete Kit.

Price Change - $400 for microtech dash unit

Location - Adelaide,SA . can post interstate.

Contact - call me on (0401409575-Allan)

Description/Info -

The Microtech Dash unit provides the driver with all important engine data on it's large,easy to read backlit screen. Also features shift light & warning lights illuminated at desired readings, all programmed with the unit itself.

This unit doubles as a handset and can be used to program the Microtech ECU and tune the car.

Instant scrolling through Data functions displaying water temp, boost, Revs etc can be done at the push of a button without taking your hands off the wheel thanks to the micro button that is included in the kit.

Kit contents include:- Head Unit, COM Cable, Micro Push button and dash mount bracket.

Pics -

this is not my pic as my dash unit has not been used just to show ya's what it look's like when it's on efi_microtech_dash.jpg

Pics of my unit -

th_100_3216.jpg th_100_3217.jpg th_100_3218.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...