Jump to content
SAU Community

Recommended Posts

Compaq Presario CQ61-107TU Notebook PC (NW982PA)

RRP is $999. Brand spanking new in box, not even opened or touched. Ill let it go for $800, FIRM.

Specifications can be found here. http://h10010.www1.hp.com/wwpc/au/en/ho/WF...29-3938413.html

PM me or email: [email protected]

got a rb20 turbo, good condition minimal shaftplay, complete with all lines, manifold. $130

set of rb20 coilpacks with holder. good condition, will give a set of spark plugs with it that were in the car before. theyve done about 100km or so still look almost brand new, $130

Stock front and dump pipe $30

im wrecking a complete rb20 engine (just the engine, not car) so any parts needed pm me.

im after a z32 afm so any offers concidered

i dont use this much so txt me on 0428851616

hi

i have a r34 turbo for sale it has done extremely low kms and is in excellent condition has no shaft play and the r34 turbos run a nylon wheel instead of a ceramic rear wheel. the reason that im selling is due to upgrading to a HKS 2535

im asking $450 ono

dont bother pm in me coz im not on hear very often

contact me on 0408494856

imgp2945b.jpg

make an offer..

orange r32 gtst coner indicators. one clip broken.

turbosmart BOV

rb20 injectors all fine..

r32 cusco fixed front strut brace.

FET turbo timer.

need this stuff gone otherwise i will chuck it.

^^^^^pretty sure it's a nylon compressor wheel, ceramic exhaust wheel but i may be wrong and it may have a steel exhaust wheel. Definatly not a nylon exhaust wheel as it would vaporise at those temps.

For sale;

Datsun 120Y 1975 4 on the floor station wagon.

I have had this car only a short time untill a family member was done with their ute, and they are now done with the ute and now there is no need for the 120Y.

It starts first time everytime with no dramas at all, the exterior and interior is a little rough but it runs like an absolute dream no joke.

I have replaced the dizzy cap and rotor button with brand new items as it was fouling plugs but now no worries what so ever, the owner before me put a mint condition 2nd hand clutch in too.

Has a bit over a month of rego and at $26 to change over into your name its a fantastic cheap reliable daily or bush basher if you wish.

It has a pioneer CD player kenwood 6x9's in it.

Its white, has rust, but seriously runs killa.

Start it off at $500ono and we'll go from there :).

0433830055 - PM me - Wayne. Call anytime as I am currently on 'holidays'.

got a rb20 turbo, good condition minimal shaftplay, complete with all lines, manifold. $130

set of rb20 coilpacks with holder. good condition, will give a set of spark plugs with it that were in the car before. theyve done about 100km or so still look almost brand new, $130

Stock front and dump pipe $30

im wrecking a complete rb20 engine (just the engine, not car) so any parts needed pm me.

im after a z32 afm so any offers concidered

i dont use this much so txt me on 0428851616

.

.

.

more parts have been taken off the engine,

rubber intake pipe (rb20) $30

rb20 AFM $70

used pod filter, still good condition, $10

or 90bux for intake pipe, pod and afm

used exedy sports tuff clutch, not sure how much meats left on it but it ran perfect wen i had it never slipped or anything, appears in good condition. $100

still allot of parts on engine, need it gone pm me for any parts

Apexi AFC

The first one with the dials before the SAFC, II and Neo stuff

Good for minor adjustments. Not wanted anymore.

$75

I paid $100 and never used it.

PM me. First with cash wins!

A sad day has come and i am selling the Rb25 Neo Power FC and Z32 Airflow meter.

2nd Hand PFC, i have had for a while and have never had the chance to install in my car - $1600

Brand new Z32 and tomei plug Sold

For sale is my Greddy BOV type RS. Bought this couple months ago for $480 and selling it now due to an upgrade.

Comes with the box and gaskets and everything you need.

Fits R33 & R34.

Price $ 400 O.N.O

Contact me on 0421188765. Kien

post-55319-1253593209_thumb.jpg

post-55319-1253593252_thumb.jpg

Apexi AFC

The first one with the dials before the SAFC, II and Neo stuff

Good for minor adjustments. Not wanted anymore.

$75

I paid $100 and never used it.

PM me. First with cash wins!

SOLD pending payment and collection.

For sale;

Datsun 120Y 1975 4 on the floor station wagon.

I have had this car only a short time untill a family member was done with their ute, and they are now done with the ute and now there is no need for the 120Y.

It starts first time everytime with no dramas at all, the exterior and interior is a little rough but it runs like an absolute dream no joke.

I have replaced the dizzy cap and rotor button with brand new items as it was fouling plugs but now no worries what so ever, the owner before me put a mint condition 2nd hand clutch in too.

Has a bit over a month of rego and at $26 to change over into your name its a fantastic cheap reliable daily or bush basher if you wish.

It has a pioneer CD player kenwood 6x9's in it.

Its white, has rust, but seriously runs killa.

Start it off at $500ono and we'll go from there :P .

0433830055 - PM me - Wayne. Call anytime as I am currently on 'holidays'.

SOLD

I no longer require my single car garage & am selling it to build a bigger one.

It is steel frame with painted zinc sides & roof with a large panel lift up door &

a personal access door on the side. It is approx 8m long & 3.5m wide.

Buyer to remove from Property (north east of city) $350

F.S. Selling My Rims. I did get these rims off another member here but have not put the rims on my r33 yet.

Item: BBS RGR in Diamond Black + Falken FK452 9

Condition: Excellent

Price: 3.5K ono

To Fit: Skylines R32,33,34, V35, S15

18x8.5 +36 Falken FK 452 235/40/18 90%

18x9.5 +38 Falken FK 452 265/35/18 90%

just some more info from the seller i got the rims from

Genuine BBS forged wheels and rare in the present offset and widths. Retails in Japan for close to 4k wheels only not including shipping and duties. Tyres are virtually brand new which cost $1200 retail. Had them on my GTT, no guard mods needed. No gutter rash at all. Few paint chips from everyday driving. Pick up only at this stage. Price is slightly negotiable first in best dressed!

Contact:call me on 0401409575(Allan)

pics

IMG_4512.jpgIMG_5252.jpgIMG_5251.jpgIMG_5250.jpgIMG_5249.jpgIMG_5248.jpgIMG_5253.jpg

ALSO FOR SALE

For Sale - Microtech Dash Unit

Condition - Excellent condition, Brand New Never Used Complete Kit.

Price - $500 posted to anywhere in australia $495 pick-up

Location - Adelaide,SA . can post interstate.

Contact - call me on (0401409575-Allan)

Description/Info -

The Microtech Dash unit provides the driver with all important engine data on it's large,easy to read backlit screen. Also features shift light & warning lights illuminated at desired readings, all programmed with the unit itself.

This unit doubles as a handset and can be used to program the Microtech ECU and tune the car.

Instant scrolling through Data functions displaying water temp, boost, Revs etc can be done at the push of a button without taking your hands off the wheel thanks to the micro button that is included in the kit.

Kit contents include:- Head Unit, COM Cable, Micro Push button and dash mount bracket.

Pics -

this is not my pic as my dash unit has not been used just to show ya's what it look's like when it's on efi_microtech_dash.jpg

Pics of my unit -

th_100_3216.jpg th_100_3217.jpg th_100_3218.jpg

Edited by R334door(s2)

F.S. Selling My Rims. I did get these rims off another member here but have not put the rims on my r33 yet.

Item: BBS RGR in Diamond Black + Falken FK452 9

Condition: Excellent

Price change: $3300ono

To Fit: Skylines R32,33,34, V35, S15

18x8.5 +36 Falken FK 452 235/40/18 90%

18x9.5 +38 Falken FK 452 265/35/18 90%

just some more info from the seller i got the rims from

Genuine BBS forged wheels and rare in the present offset and widths. Retails in Japan for close to 4k wheels only not including shipping and duties. Tyres are virtually brand new which cost $1200 retail. Had them on my GTT, no guard mods needed. No gutter rash at all. Few paint chips from everyday driving. Pick up only at this stage. Price is slightly negotiable first in best dressed!

Contact:call me on 0401409575(Allan)

pics

IMG_4512.jpgIMG_5252.jpgIMG_5251.jpgIMG_5250.jpgIMG_5249.jpgIMG_5248.jpgIMG_5253.jpg

ALSO FOR SALE

For Sale - Microtech Dash Unit

Condition - Excellent condition, Brand New Never Used Complete Kit.

Price Change - $400 for microtech dash unit

Location - Adelaide,SA . can post interstate.

Contact - call me on (0401409575-Allan)

Description/Info -

The Microtech Dash unit provides the driver with all important engine data on it's large,easy to read backlit screen. Also features shift light & warning lights illuminated at desired readings, all programmed with the unit itself.

This unit doubles as a handset and can be used to program the Microtech ECU and tune the car.

Instant scrolling through Data functions displaying water temp, boost, Revs etc can be done at the push of a button without taking your hands off the wheel thanks to the micro button that is included in the kit.

Kit contents include:- Head Unit, COM Cable, Micro Push button and dash mount bracket.

Pics -

this is not my pic as my dash unit has not been used just to show ya's what it look's like when it's on efi_microtech_dash.jpg

Pics of my unit -

th_100_3216.jpg th_100_3217.jpg th_100_3218.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
    • To drain the Intake Heat Exchanger, there is a crappy drain plug in front of the driver's side front tyre: You should use the largest headed phillips screwdriver you had, and in my case I needed vice grips on the hose above as the plug was tight (tighter than it needed to be, since it has an o-ring seal).  After you have a tray down and open the drain, open the intake heat exchanger reservoir cap (drivers side one) and you should get a couple of litres of coolant To get to the radiator, you need to remove the plastic engine undertray. It is held on with a series of 10mm headed bolts and some clips. For the radiator, there is another type of crappy drain (kind of like a plastic banjo bolt) and you should attach a length of hose to direct the stream of coolant per this pic (otherwise the coolant hits the rad support and goes everywhere). The drain is on the rear of the radiator on the driver's side and a bit hard to find. Put a big tray or bucket down (5l won't be enough) and slowly unscrew the fitting by hand. You only want to remove it far enough for coolant to flow, it you unscrew it right out the whole fitting and direction pipe will come off and you will get a coolant bath (yum!). Undo the radiator reservoir cap and it should empty about 8l
    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You also need to drain the intake heat exchanger to remove the radiator so you will need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. 2 other tools that really help dealing with coolant lines and spring clamps are Bent Needle Nose pliers Hose pliers Between them they will reduce the frustration (and injury) potential by about 1000% Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
×
×
  • Create New...