Jump to content
SAU Community

Recommended Posts

For Sale/Trade

6 x Nismo 740cc sidefeed Injectors

Have been cleaned and flow tested - all 100%

Currently installed in my car (RB25DET S2), am wanting to either sell for $850 ono...or Trade for 6 (Six) Nismo 550cc Sidefeed Injectors that have also been flowtested.

Pm for more details.

Part are located near Mitcham

Suspension/Steering

R32:

2x Front Sway Bar - $50ea

1x Front Complete upper control arm assembly (passenger side) including bracket and king pin bearing, urethane bushing - $100 -- PICS PICS

2x Front Camber Arms - $40ea -- PICS

2x Front Passenger side Lower Control Arm - $60 -- PICS

1x Front Tie Rod End - $10 -- PICS

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Lower Control Arms - $60ea -- PICS

2x Rear sway bar links w/ Urethane bushes - $15ea -- PICS

2x Rear Hubs - $100ea -- PICS PICS

1x Rear Sway Bar - $50ea

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

S13:

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

Misc

R32

1x Horn, can be hooked up to any car - $20 -- PICS

2x Stock Clutches, 1 half warn, one fair bit more warn - $30 and $70

1x Stock Rear Spoiler (with brake light) - $50 -- PICS

3x RB20 Coilpacks - $30ea

1x Turbo Timer, very basic timer, manual set - $20

1x RB20 Fuel Pump - $40 -- PICS

1x Igniter Module (breaks down under a lot of heat) - $30 -- PICS

Random shit

1x Handbrake lever - $5 -- PICS

5x Hub Covers - $20 -- PICS

Stagea/33/34 radiator ... 64,000kms old .... good condition ... $150

Malpassi FPR ... used condition ... noisy on start up and hard to adjust ... don't know much about them sorry ... $50

Stagea in tank fuel pump ... 64,000kms old ... works well ... $80

R33 4 door Skyline ... 133,000kms ... runs great ... $8,500

PM me

:sick:

Expressions of Interest

Group Buy - Siemens Deka fuel injectors

I ordered 6 injectors from Miami last fortnight and they arrived here in rapid time. Ended up costing me $360 for a set of 6 575cc injectors for my RB26dett (low impedance, top feed). A couple of members here are considering getting new injectors, so I was wondering if anyone is keen to join the purchase and maybe get a discount (maybe... $360 is pretty cheap as it stands, as it's half as much the australian distributors want for the exact same injector).

Sizes are from 300-1300cc, top feed only but either low or high impedance

PM me if you're interested - this is a once off and I won't be doing a repeat order.

-D

EDIT - He does do RB25 Neo injector top feed conversion packages for around $600 that include a fuel rail, 850cc injectors, ev6 and ev1 adaptor and seals

I'm extending this offer for cheap injectors indefinately. Seems I've come to a good understanding with the distributor in the USA who is more than happy to continue selling injectors to us.

I can get any size injectors, from 300-1300cc, both low and high impedance, both top and side feeds. Can obtain injectors for any Nissan and Toyota engines, as well as GM V8's.

Note, I will not be making any money of this venture, however any orders placed individually will incur a higher cost for shipping.

Prices range from around $360* for 550cc injectors up to $500* for the hardcore 1000cc multi nozzle injectors (set of 6 - can also do sets of 4, 8, 12 or whatever you require)

If I get enough interest, I'll purchase stock for emergency use/quick sales.

PM me if you would like more details. Current brands sold so far are Siemens-Deka, Lucas and Delphi. Technical specifications are available upon request, and all injectors are flow matched within 1% tolerance of each other.

-D

*** Please note that these prices are estimates based upon the last 3 orders I've placed at the current exchange rate with the US dollar. They may rise or fall given the strength of the greenback vs the AUD.

got some whiteline urethane subframe bushes (pineapples) out of my car that i dont need anymore. for anyone who doesn't know these tighten up ur rear end without making it harsh, awesome solution for street cars, reduces axle tramp and lets u align ur subframe for squat, neutral or anti-squat.

according to the whiteline site, these will fit most nissans, S13/S14/S15 R32/R33/R34 GTS, GTR etc etc Ceffy, laurel etc etc even N14 pulsars it seems.

Price:

$80

Pics:

pineapple.jpg

Items:

Dual Solenoid Blitz SBC Spec R Boost Controller

Item Condition:

Used, Good.

Extra Info:

Upgraded to SBC ID-III, this is wasted sitting in a box :wave:

Contact Details:

PM me.

Price and price conditions:

$280 + Postage (Or pick-up)

SBCSpecRKit.jpg

DualSBCSpecR.jpg

DualSolenoid.jpg

Items:

RAYS Engineering Dura-Nuts in Blue, Normal length type.

Item Condition:

Used, Average (Rattle Gun damage.). See pic.

Extra Info:

These are still on my car, which is at the body shop. I expect the car back from the body shop at the start of next week. I am upgrading them with the same nuts, in the Long type. There are no lock nuts with these, just 20 Rays wheel nuts, they retail on JustJap.com store for $275... shoot me an offer :(

Contact Details:

PM me.

Price and price conditions:

$90 + Postage (Or pick-up)

WheelNutCondition.jpg

Lilliput 629GL 7" VGA Touchscreen for CarPC in double din mount - $290, might consider swap for decent single din headunit.

Original box, stand, remote and casing included.

Dimensions of double din mount:

Width: 177mm

Height: 107mm

Depth: 71mm

Touch Screen: four-wire resistive touchscreen

Inputs: 1 VGA input and 1 RCA input, 1 AUDIO input

Built-in Speaker

Infrared Remote Control

Input Voltage: DC 11-13V

Power Consumption: <8W

Screen size: 7 inches diagonal

Physical dimensions (in): 7.33W x 5H x 1.5D

Ratio: 16:9 wide TFT screen

Native Resolution: 800x480

Resolution Range: 640x480 up to 1280x1024

Dot Resolution: 2400 x 480 (= 1,152,000 dots)

Color configuration: RGB stripe

Video system: PAL/NTSC

1 Video input plus 1 Audio input

VGA input

Touchscreen display (USB interface)

IR remote control

Full function OSD control (Multi-language)

Audio output: Speaker built-in

Video input signal: 1.0Vp-p, composite video

High resolution and no radiation

Computer display/S-video/DVD/VCD/Security system/Navigation system compatible

(Rear view camera connectible)

Mount type: Dash board

Power input: DC 12V

post-63773-1258449501_thumb.jpg post-63773-1258449540_thumb.jpg

post-63773-1258449587_thumb.jpg

Lilliput 629GL 7" VGA Touchscreen for CarPC in double din mount - $290, might consider swap for decent single din headunit.

Original box, stand, remote and casing included.

Dimensions of double din mount:

Width: 177mm

Height: 107mm

Depth: 71mm

Touch Screen: four-wire resistive touchscreen

Inputs: 1 VGA input and 1 RCA input, 1 AUDIO input

Built-in Speaker

Infrared Remote Control

Input Voltage: DC 11-13V

Power Consumption: <8W

Screen size: 7 inches diagonal

Physical dimensions (in): 7.33W x 5H x 1.5D

Ratio: 16:9 wide TFT screen

Native Resolution: 800x480

Resolution Range: 640x480 up to 1280x1024

Dot Resolution: 2400 x 480 (= 1,152,000 dots)

Color configuration: RGB stripe

Video system: PAL/NTSC

1 Video input plus 1 Audio input

VGA input

Touchscreen display (USB interface)

IR remote control

Full function OSD control (Multi-language)

Audio output: Speaker built-in

Video input signal: 1.0Vp-p, composite video

High resolution and no radiation

Computer display/S-video/DVD/VCD/Security system/Navigation system compatible

(Rear view camera connectible)

Mount type: Dash board

Power input: DC 12V

post-63773-1258449501_thumb.jpg post-63773-1258449540_thumb.jpg

post-63773-1258449587_thumb.jpg

You have to sell this when i have no money :)

got some whiteline urethane subframe bushes (pineapples) out of my car that i dont need anymore. for anyone who doesn't know these tighten up ur rear end without making it harsh, awesome solution for street cars, reduces axle tramp and lets u align ur subframe for squat, neutral or anti-squat.

according to the whiteline site, these will fit most nissans, S13/S14/S15 R32/R33/R34 GTS, GTR etc etc Ceffy, laurel etc etc even N14 pulsars it seems.

Price:

$80

Pics:

pineapple.jpg

sold

I have a Apexi Power Fc for sale to suit a 1993,94 R32 Gtr & R33 Gtr no hand set . $850 .

good option for RB25 guys also, i currently run a GTR pfc pro in my RB25det

Shaun at boostworx knows the wiring up procedure to have a hybrid ecu

You have to sell this when i have no money :)

I guess you'll also be happy to hear that it's sold :down:

You can grab all the gear from mp3car and bybyte when the time comes, it'll be closer to $400 to get everything new though ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...