Jump to content
SAU Community

Recommended Posts

For Sale:

Apexi Super Air Flow Controller SAFC in top working order. No longer wanted.

$225

Cash ... not promises. Not inc postage.

For Sale:

Stagea tiptronic box with shift kit, new solenoids, fully serviced, ready to go!

$475

Cash ... not promises. Postage/freight for something this large not my responsibility.

Both items available for pick up.

No timewasters or dreamers.

KKR rear camber for s13/r32/a31 $170

KKR castor for same as above $170

Pineapples $80

Whiteline adjustable sway bar with with all mounting hardware $200

Autobarn OIl cooler/relocater,sandwhich plate,greedy oil filter $350

all prices negotiable

Located Adelaide south

PICTURES HERE

http://www.skylinesaustralia.com/forums/Dr...72#entry5034772

Genuine Recaro SPG 2 fixed back with Genuine Recaro R32, R33 side mount rail - $750 neg. (regency legal too)

R32 Carbon Door trims - $400 FIRM (the fit on these is absolutely awesome too)

235/45/17 Falken Ziex tyres, pair only, brand new - $400

Ceffy Fuel Tank - $50

Ceffy boot lid - $25 (some bog on it, but good for track car)

35mm bolt on spacers - $125 pair (got 2 pairs)

Nardi Steering wheel with genuine nardi boss kit to suit R32 - $250

PICS:

rimg0011.jpgrimg0014h.jpg

rimg0003t.jpg

rimg0004r.jpg

rimg0010v.jpg

rimg0006k.jpg

rimg0008zp.jpg

Edited by JD_CEF

Hey guys up for sale is a Stainless steel HKS front pipe - $250 This exact one from nengun

http://www.nengun.com/hks/stainless-front-pipe

Also a Grex Oil filter Relocator kit including a greddy oil filter - $150

http://www.nengun.com/trust-greddy/oil-filter-moval-kit including

Cusco Drag Rods, these remove the hicas unit completely to shed wait and replace the tie rods with much thicker ones - $250

http://www.nengun.com/cusco/drag-rod

All items are new still

Edited by /2on
Cusco Drag Rods, these remove the hicas unit completely to shed wait and replace the tie rods with much thicker ones - $250

http://www.nengun.com/cusco/drag-rod

All items are new still

Possibly interested.

PM sent

Hey guys,

Firstly I wont be online again for a while. So you must contact me via mobile 0402 902 759 (matt).

R32 Dash Vents, Middle and passengers.

Immaculate condition.

Can not be posted as Im away but can be picked up from Western Suburbs (adelaide).

$150, firm for the pair, no pics you know what they looks like.

R32 BITS

Nothing over $100

Here are bits and pieces just laying around which i dont need naymore. Over looking at them in the garage too. Some parts are GTR but they will fit on gtst.

sub frame $50

sway bar $50

front brakes, heaps of meat $100

front rotors, heaps of meat $100

air con condenster $50

power steering canester $30

washer bottle $10

window wipers $5

gtr or gtst air con pump $40 each

air con bracket $10

coolant overflow bottle $10

upper control arms (MINT CONDITION) $100

front guards black with green pearl (MINT CONITION) $100

glove box $10

dash, no bubbles, small crack where u barely see $40

standard rear bar $80

bomex front bar, needs respray and top ends where bolts go have been crack off, not that bad easy to fix $50

standard dump pipe $30

gtr and gtst hicas pump $30 each

gtr steering column $20

need these gone asap, need the money. I have heaps more stuff which arnt listed, just contact me on 0417 378 515

Gt3540 + Stainless Manifold + 3" Intake + 3.5" Dump Front

good for 350-400rwkw, turbo was bought from ATS( Adelaide Turbo Services) 3 months ago can call Bill to confirm.

$2500

-Garrett GT35 Turbo with 0.5 front cover (faster spool then 0.7) and 0.82 rear IW, comes with Custom Braided turbo feed line, oil restrictor and custom turbo drain, water banjos etc

and 19psi actuator, also included is an hks alloy hard out let elbow to suit. Id CHRA is 706451-24

-Tune length low mount stainless manifold

-3.5" Bellmouth dump front pipe & catless pipe

-3" Silicon with alloy connector intake pipe

post-31991-1262941091_thumb.jpgpost-31991-1262941134_thumb.jpgpost-31991-1262941146_thumb.jpg

post-31991-1262941158_thumb.jpgpost-31991-1262941196_thumb.jpgpost-31991-1262941206_thumb.jpg

Water Methanol Cooling mist setup suit skyline r33 in excellent condition, kit is wired up ready to bolt in

$400

Includes the following:

Modified r33 skyline washer tank (also spare new trunk mount tank)

BLACK 150 psi pump

3 meters high pressure hose

Brass fittings

World class brass checkvave rated at 600 PSI and over 300 F

Injector that installs from the OUTSIDE of the pipe

Injector holder

Relay

Relay Harness

Fuse

Fuse Holder

boost switch adjustable from 1-25 psi.

various electrical connectors

Also comes with new spare tank and fuses/relays

R33 cross over pipe drilled and tapped

post-31991-1262941391_thumb.jpgpost-31991-1262941456_thumb.jpgpost-31991-1262941473_thumb.jpg post-31991-1262941573_thumb.jpg

Sard 850cc side feed injectors rb25det

come in fuel rail with fuel regulator, injector o-rings, collets, injector loom with clips soldered in and modified clips to suit, all bolts straight into rb25det, only 2 months old!

$800

post-31991-1262941652_thumb.jpgpost-31991-1262941669_thumb.jpg

Apexi Power Fc + Hand Controller Suit R33 RB25det

Comes with 310rwkw tune to suit rb25det with, 3.5" exhaust, gt35, z32 afm, sard 850cc injectors

post-31991-1262941808_thumb.jpg

$1300

Injetcors SOLD

Rest still for sale

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...