Jump to content
SAU Community

Recommended Posts

got a set of r34 gtt rims for sale the same as in the pic, excellent condition, tires are gone $300

also have a r34 auto trans 80 xxx kms $200

located in mansfield park....pm or text me on 0402 613 042

post-70223-1279123504_thumb.jpg

EOI/FORSALE

I have 2 brand new VELO Podium 2 fixed back Bucket seats, re trimmed by Autosport in Sparco Blue with White writing only pair with this combo.

FIA and ADR approved

Immaculate never been installed comes with mounting brackets.

Also has the receipts too

Looking for around $2500

Located Adelaide

Lewis - 0432581798 or PM

1fz8ds.jpg

2ilnalj.jpg

Edited by Volk34
If only we could edit posts

I have a pair of RDA slotted front rotors for R33 GTSt (290mm) - $300

A pair of RDA standard R31 rear rotors - $100

550cc/min injectors. Bolt in on RB20DET. Bought thru Dohmar earlier in the year, now have no use for them - $400

RB30 ECU and AFM - $50

plus a heap of R31 sedan doors and some other panels, cheap cheap

Front rotors on hold, Injectors sold

few random sr, 32 parts ive got sitting around

s13 or s14 radiator not sure it came out of my s13 but was told it is s14 $50

gates top rad hose for sr with temp adaptor $50, used for 1 track day, but im now putting the temp sensor in the thermostat housing, im rebuilding the engine so making everything uber neat and tidy, its like brand new still

earls silvia rear braided brake lines $40

sr viscus fan $30

r32 5stud front knuckles with hubs, bearings feel good $100

cannon 3in inlet 4-5in tip bit banged up $20

redtop sr intake manifold with throttle body $50 polish this one and swap it with urs to avoid car downtime

pair of 15x6 or 6.5in rims mulit stud 4x100 and 4x114.3 5spoke painted black no tyres $20

i probably have more parts at home but ill add them up later, pics up tonight on major parts

intirested parts for trade with cash either way, r32 gtr rear swaybar, s14 sr20 waterneck, posibly other cool s13 sr20 parts

For Sale

1/ Holden 253/308 heavy duty clutch never used suits M21 $150

http://i533.photobucket.com/albums/ee334/r...ds/P1050372.jpg

2/ Oil catch can never used $30

http://i533.photobucket.com/albums/ee334/r...ds/P1050371.jpg

3/ R33 series 2 turbo very minimal shaft play, was running 12psi for a while comes with stainless dump and 3" stainless pipe to cat. Taken off car 3 months ago no problems. $400

http://i533.photobucket.com/albums/ee334/r...ds/P1050370.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050369.jpg

5/ R33 NA rear brake calipers and discs good condition $30

6/ V6 pagero drivers side genie extractor Sorry only one side $50

http://i533.photobucket.com/albums/ee334/r...ds/P1050368.jpg

You can PM me or ring Brad on 0427999093

Rims sold

Oil catch can sold pending payment (craigR33)

Hey guys, got this up for sale. Trying to fund another project lol

Arrow AX-8 30/32 with 40mm axle set up

PRD Fireball 125 electric start, water cooled motor

New XL seat

New steering wheel

New One piece clutch and drum (10 tooth)

New radiator (not fitted)

New battery

Mychron 3 with water temp, RPM and magnetic pick up

Used MG Reds (good for practise only)

Kart was raced for one season by previous owner. I only used kart socially.

The motor is strong had a new ring fitted 5 hours ago (approx), good to practise with

but would rebuild if you are going to race competion. The header pipe has been repaired and works fine (as seen in photo). The rims are alloy and have been painted black by the previous owner!

The radiator on the kart has a leak at the top bracket and could be repaired and used as a spare. The kart has all the usuall rub marks but is neat and tidy. Not many spares, but whatever I have will come with the kart. Thats about all the info I have, hope this helps. Exellent kart for beginer in TAG or TAG R class's.

I have had this for about 2.5 years and honestly hardly used it. Awesome fun to throw around at Pt Gawler though. A shame to get rid of it but yeh, no point in keeping it if i dont use it

Cheers

$3,200 ono Contact Mark on 0412 327 985

EDIT: Kart located in Adelaide, my bad!

up for sale ...

92 r32 gtst (sunroof model) just clocked 116 000kms

manual

only mod's are 3in turbo back exaust and

k&n pod filter

& tien rear coilovers and unknown brand front coilovers

very tidy interior, perfict dash (unlike alot ive seen)

just had a cut and polish &

fresh 3 months rego

located in mansfield pk...PM or TEXT me anytime day or night on 0402613042

post-70223-1279283696_thumb.jpg

post-70223-1279283713_thumb.jpg

post-70223-1279283733_thumb.jpg

post-70223-1279283757_thumb.jpg

post-70223-1279283774_thumb.jpg

up for sale ...

92 r32 gtst (sunroof model) just clocked 116 000kms

manual

only mod's are 3in turbo back exaust and

k&n pod filter

& tien rear coilovers and unknown brand front coilovers

very tidy interior, perfict dash (unlike alot ive seen)

just had a cut and polish &

fresh 3 months rego

located in mansfield pk...PM or TEXT me anytime day or night on 0402613042

price???

up for sale ...

92 r32 gtst (sunroof model) just clocked 116 000kms

manual

only mod's are 3in turbo back exaust and

k&n pod filter

& tien rear coilovers and unknown brand front coilovers

very tidy interior, perfict dash (unlike alot ive seen)

just had a cut and polish &

fresh 3 months rego

located in mansfield pk...PM or TEXT me anytime day or night on 0402613042

the car is now SOLD

HKS Coilovers

I have for sale some HKS coilovers for a skyline r33 GTST the fronts are hyper 'd's and the rears are hypermax.

They have been resealed with new seals and new oil and nitrogen gas approx 15000kms ago.

I have taken them out of my car because the rears have a slight tick every now and then (depends on road). It sounds like the pillow balls are slightly worn.

I also noticed after taking out one of the rears it has about half a cm of gas in top of tube when shaft is fully extended you can hear it squelch a little.

There are no leaks and still have gas.

These would be great for a track or drift car.

They dont come with and C spanners or keys. The dampning can be done with a 3mm allan key.

They are as is in the picture. Thats about it. You are welcome to have a good look. Located near Parafield Airport

Asking $700

PM me or 0427999093

http://i533.photobucket.com/albums/ee334/r...ds/P1050375.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050376.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050378.jpg

Tanabe Medalion Exhaust

76mm cat flange to 85mm pipe cat back system. 200mm cannon with 110mm tip to suit R33 GTS-t or GTR, pretty loud but nice note. Comes with slide in silencer. Few scratches on underside of cannon. $300

RB25 cam seals

Brand new, part number 13042-16V00AU. Retail for around $16 each, asking $20 for both.

PM or message/call 0413 697 162

Still for sale

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...