Jump to content
SAU Community

Recommended Posts

got a set of r34 gtt rims for sale the same as in the pic, excellent condition, tires are gone $300

also have a r34 auto trans 80 xxx kms $200

located in mansfield park....pm or text me on 0402 613 042

post-70223-1279123504_thumb.jpg

EOI/FORSALE

I have 2 brand new VELO Podium 2 fixed back Bucket seats, re trimmed by Autosport in Sparco Blue with White writing only pair with this combo.

FIA and ADR approved

Immaculate never been installed comes with mounting brackets.

Also has the receipts too

Looking for around $2500

Located Adelaide

Lewis - 0432581798 or PM

1fz8ds.jpg

2ilnalj.jpg

Edited by Volk34
If only we could edit posts

I have a pair of RDA slotted front rotors for R33 GTSt (290mm) - $300

A pair of RDA standard R31 rear rotors - $100

550cc/min injectors. Bolt in on RB20DET. Bought thru Dohmar earlier in the year, now have no use for them - $400

RB30 ECU and AFM - $50

plus a heap of R31 sedan doors and some other panels, cheap cheap

Front rotors on hold, Injectors sold

few random sr, 32 parts ive got sitting around

s13 or s14 radiator not sure it came out of my s13 but was told it is s14 $50

gates top rad hose for sr with temp adaptor $50, used for 1 track day, but im now putting the temp sensor in the thermostat housing, im rebuilding the engine so making everything uber neat and tidy, its like brand new still

earls silvia rear braided brake lines $40

sr viscus fan $30

r32 5stud front knuckles with hubs, bearings feel good $100

cannon 3in inlet 4-5in tip bit banged up $20

redtop sr intake manifold with throttle body $50 polish this one and swap it with urs to avoid car downtime

pair of 15x6 or 6.5in rims mulit stud 4x100 and 4x114.3 5spoke painted black no tyres $20

i probably have more parts at home but ill add them up later, pics up tonight on major parts

intirested parts for trade with cash either way, r32 gtr rear swaybar, s14 sr20 waterneck, posibly other cool s13 sr20 parts

For Sale

1/ Holden 253/308 heavy duty clutch never used suits M21 $150

http://i533.photobucket.com/albums/ee334/r...ds/P1050372.jpg

2/ Oil catch can never used $30

http://i533.photobucket.com/albums/ee334/r...ds/P1050371.jpg

3/ R33 series 2 turbo very minimal shaft play, was running 12psi for a while comes with stainless dump and 3" stainless pipe to cat. Taken off car 3 months ago no problems. $400

http://i533.photobucket.com/albums/ee334/r...ds/P1050370.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050369.jpg

5/ R33 NA rear brake calipers and discs good condition $30

6/ V6 pagero drivers side genie extractor Sorry only one side $50

http://i533.photobucket.com/albums/ee334/r...ds/P1050368.jpg

You can PM me or ring Brad on 0427999093

Rims sold

Oil catch can sold pending payment (craigR33)

Hey guys, got this up for sale. Trying to fund another project lol

Arrow AX-8 30/32 with 40mm axle set up

PRD Fireball 125 electric start, water cooled motor

New XL seat

New steering wheel

New One piece clutch and drum (10 tooth)

New radiator (not fitted)

New battery

Mychron 3 with water temp, RPM and magnetic pick up

Used MG Reds (good for practise only)

Kart was raced for one season by previous owner. I only used kart socially.

The motor is strong had a new ring fitted 5 hours ago (approx), good to practise with

but would rebuild if you are going to race competion. The header pipe has been repaired and works fine (as seen in photo). The rims are alloy and have been painted black by the previous owner!

The radiator on the kart has a leak at the top bracket and could be repaired and used as a spare. The kart has all the usuall rub marks but is neat and tidy. Not many spares, but whatever I have will come with the kart. Thats about all the info I have, hope this helps. Exellent kart for beginer in TAG or TAG R class's.

I have had this for about 2.5 years and honestly hardly used it. Awesome fun to throw around at Pt Gawler though. A shame to get rid of it but yeh, no point in keeping it if i dont use it

Cheers

$3,200 ono Contact Mark on 0412 327 985

EDIT: Kart located in Adelaide, my bad!

up for sale ...

92 r32 gtst (sunroof model) just clocked 116 000kms

manual

only mod's are 3in turbo back exaust and

k&n pod filter

& tien rear coilovers and unknown brand front coilovers

very tidy interior, perfict dash (unlike alot ive seen)

just had a cut and polish &

fresh 3 months rego

located in mansfield pk...PM or TEXT me anytime day or night on 0402613042

post-70223-1279283696_thumb.jpg

post-70223-1279283713_thumb.jpg

post-70223-1279283733_thumb.jpg

post-70223-1279283757_thumb.jpg

post-70223-1279283774_thumb.jpg

up for sale ...

92 r32 gtst (sunroof model) just clocked 116 000kms

manual

only mod's are 3in turbo back exaust and

k&n pod filter

& tien rear coilovers and unknown brand front coilovers

very tidy interior, perfict dash (unlike alot ive seen)

just had a cut and polish &

fresh 3 months rego

located in mansfield pk...PM or TEXT me anytime day or night on 0402613042

price???

up for sale ...

92 r32 gtst (sunroof model) just clocked 116 000kms

manual

only mod's are 3in turbo back exaust and

k&n pod filter

& tien rear coilovers and unknown brand front coilovers

very tidy interior, perfict dash (unlike alot ive seen)

just had a cut and polish &

fresh 3 months rego

located in mansfield pk...PM or TEXT me anytime day or night on 0402613042

the car is now SOLD

HKS Coilovers

I have for sale some HKS coilovers for a skyline r33 GTST the fronts are hyper 'd's and the rears are hypermax.

They have been resealed with new seals and new oil and nitrogen gas approx 15000kms ago.

I have taken them out of my car because the rears have a slight tick every now and then (depends on road). It sounds like the pillow balls are slightly worn.

I also noticed after taking out one of the rears it has about half a cm of gas in top of tube when shaft is fully extended you can hear it squelch a little.

There are no leaks and still have gas.

These would be great for a track or drift car.

They dont come with and C spanners or keys. The dampning can be done with a 3mm allan key.

They are as is in the picture. Thats about it. You are welcome to have a good look. Located near Parafield Airport

Asking $700

PM me or 0427999093

http://i533.photobucket.com/albums/ee334/r...ds/P1050375.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050376.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050378.jpg

Tanabe Medalion Exhaust

76mm cat flange to 85mm pipe cat back system. 200mm cannon with 110mm tip to suit R33 GTS-t or GTR, pretty loud but nice note. Comes with slide in silencer. Few scratches on underside of cannon. $300

RB25 cam seals

Brand new, part number 13042-16V00AU. Retail for around $16 each, asking $20 for both.

PM or message/call 0413 697 162

Still for sale

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...