Jump to content
SAU Community

Recommended Posts

RB20DET Coilpack Loom - good condition, no misfires. - $50

RB20DET Ignitor Module - $50

RB20DET Injector Resistor Pack - $10

RB20DET Turbo + Exhaust Manifold - I never had a boost controller so was running on stock boost. - $100

RB20DET ECCS Inlet Manifold - complete with injectors, fuel rail, throttle body etc. - $100

PM/SMS. 0438858813.

RB20DET Coilpack Loom - good condition, no misfires. - $50

RB20DET ECCS Inlet Manifold - complete with injectors, fuel rail, throttle body etc. - $100

PM/SMS. 0438858813.

RB Flywheel $50

Gearbox Sandwich Plate $10

R33 Speedo Sender $50

Clutch Throwout Bearing (NEW) $35

RB20DET Gearbox Yoke $50

SECO Pressure Plate $50 (Jim Berry rebuilds these for his clutches)

R32 Starter Motor $20

RB20 Dump $20

NISMO Clutch, pressure plate is machined, $50

RB20 Ignitor Module $50

RB20 Crossover Pipe, with BPV attached $50

RB20 Turbo + Exhaust Manifold $100

Exedy RB Chrome Moly Lightened Flywheel (Freshly Machined) $350

post-59195-1282812432_thumb.jpg

post-59195-1282812453_thumb.jpg

Xtreme Heavy Duty Cushion Button Clutch Kit for RB $300

Driven 15,000 kms, upgraded due to more power

post-59195-1282812540_thumb.jpg

post-59195-1282812572_thumb.jpg

post-59195-1282812639_thumb.jpg

post-59195-1282812688_thumb.jpg

post-59195-1282812610_thumb.jpg

post-59195-1282812732_thumb.jpg

Lightened Flywheel + Clutch Kit together $550

PM or sms/call for info 0413 733 433

located in adelaide, aberfoyle park

all offers considered.

R32 Tein HA Coilovers

Damper and Height adjustable

$500

R33 Tein Ha Coilovers

Height adjustable

$500

R33 Cat back exhausts

Twin pipe setup, $300

Kaikamoto (spelling) $300

R32 Indicators (orange)

$100

RB20/Rb20 S1 Coilpacks

$100

R33 Turbo/Manual Diff

$150

R33 Brakes, Front and rear

$500

R33 5 Stud hubs, Front and rear

$80

Also Check:

http://www.skylinesaustralia.com/forums/R3...13-t315266.html

http://www.skylinesaustralia.com/forums/Ni...13-t318919.html

http://www.skylinesaustralia.com/forums/R3...ff-t320107.html

Edited by JiN_MaN

For Sale:

Left and Right hand side 12 inch subwoofer enclosures made of fibreglass, fits into the corner of ur boot looks good.

Fits r34, dont think u will find them in s.a!

Asking 180$ for the pair!

For Sale:

Left and Right hand side 12 inch subwoofer enclosures made of fibreglass, fits into the corner of ur boot looks good.

Fits r34, dont think u will find them in s.a!

Asking 180$ for the pair!

Got pics mate?

17*8 Drift R by ROH Megs 5 spoke 114.3 pattern.

Well looked after mag wheels. Black power coated spokes with polished lip. Paint on one of the wheels are comming off in the centre but other three wheels are in perfact condition. Two of the wheels have very very small gutter rash see picture, unoticable. $300.

Also have r33 gtst stock closover pipe with GFB BOV great working order. $100

R33 gtst stock cooler great condition for $50.

Feel free to contact me here or 0412724796.

cheers.

P.s I was trying to upload some pictures but somehow it got lost. I can suply pictures up on request via PM. ta

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
×
×
  • Create New...