Jump to content
SAU Community

Recommended Posts

s1/2 r33 rb25det head for sale, rebuilt 7000kms ago have receipts, motor has done rings so replacing it with a neo 6 and selling off the bits.

Head is very clean, turns over by hand fine, all valves look fine.

call Roland on <removed> or PM me on here.

F.S

R32 GTR 93

DEFECTED

NEEDS NEW TYRES, SIDE INDICATORS, HORN, WINDSCREEN WIPER RUBBER,

125XXX KM

260KWATW GOT DYNO SHEET

MINES COMPUTER & AIRFOW METRES.

CAR IS DEFECTED AND I DONT HAVE THE TIME OR MONEY TO GET IT OFF . I NEED THE CASH ASAP THIS IS WHY IM SELLING THE CAR CHEAPPPPPPPPP,

BODY IS STRAIGHT AND ENGINE COMPRESSION IS EXCELLENT, ANY CHECKS ON THE CAR IS WELCOMED. BODY IS A LIL ROUGH AS IT WAS A BACKYARD SPRAY JOB

FIRST WITH CASH GETS IT I AM NOT HOLDING IT FOR ANYONE, NEED TO SELL BY THIS WEEK.

8K FIRM

0468931301

F.S

R32 GTR 93

DEFECTED

NEEDS NEW TYRES, SIDE INDICATORS, HORN, WINDSCREEN WIPER RUBBER,

125XXX KM

260KWATW GOT DYNO SHEET

MINES COMPUTER & AIRFOW METRES.

CAR IS DEFECTED AND I DONT HAVE THE TIME OR MONEY TO GET IT OFF . I NEED THE CASH ASAP THIS IS WHY IM SELLING THE CAR CHEAPPPPPPPPP,

BODY IS STRAIGHT AND ENGINE COMPRESSION IS EXCELLENT, ANY CHECKS ON THE CAR IS WELCOMED. BODY IS A LIL ROUGH AS IT WAS A BACKYARD SPRAY JOB

FIRST WITH CASH GETS IT I AM NOT HOLDING IT FOR ANYONE, NEED TO SELL BY THIS WEEK.

8K FIRM

0468931301

Ohh and you can't legally sell a defected car in SA.

you can but it needs to be sold as a wreck.. as you cant legally transfer rego into your name which means you dont "own" the vehicle.

i bought a defect car, then sold it, guy who bought it got caught speeding and as i could transfer it into my name the cops came after me, then i said i sold it so they went after him, but fined me for selling and buying it.

Contact: 0402 902 759

Location: Adelaide

R34 Parts

Door cards $150

sdc12044h.th.jpg

Turbo Back Exhaust , standard dump, 3" front, cat, 3" catback with cannon and 4" tip $450

sdc12045l.th.jpg

sdc12046bm.th.jpg

R34 Passengers guard $150

sdc11752.th.jpg

sdc11751u.th.jpg

R34 Rear Seat $80

rearseat.th.jpg

Glove Box $50

sdc12042tu.th.jpg

Complete Boot Interior, Mat, Side panels, Black plastics $150

KYB Buzz Spec Suspension, damper adjustable $500

sdc12056.th.jpg

sdc12057n.th.jpg

sdc12059.th.jpg

Front Reo $150

R34 Bonnet $300

sdc11483g.th.jpg

Front strut brace $100

Rear parcel shelf $50

Dash + Airbag $200

Interior rear quater panels, Pair $100

ECU cover $30

R34 Brakes

Front and Rear

Calipers and Rotors

$650

sdc12051u.th.jpg

sdc12052u.th.jpg

sdc12053q.th.jpg

Dash Cluster $80

speedoe.th.jpg

Zenon Headlights pair $900

Front Lower Control Arms pair $175

sdc12049e.th.jpg

Standard Intercooler $130

sdc11753.th.jpg

sdc11754o.th.jpg

S13 SR20 Blacktop Power FC with hand controller. Can be converted to redtop S13 SR20. $850

sdc12063b.th.jpg

GCG Highflow turbo $1000

sdc11758v.th.jpg

sdc11760.th.jpg

sdc11762.th.jpg

sdc11765.th.jpg

R33 Diff $150

sdc12047.th.jpg

R32 Cat back exhaust $300

sdc11767h.th.jpg

sdc11768u.th.jpg

R32 Turbo $100

4x Bridgestone Playz 245/45/18 $150

sdc11468lk.th.jpg

17" x 7.5" +30 pair $50

sdc11479.th.jpg

S14/R33 Steering wheel $220

sdc11512b.th.jpg

R32 GTS-T Steering Wheel

sdc11542u.th.jpg

Apexi ECV $200

sdc11543.th.jpg

Boost Gauge $50

sdc11551.th.jpg

Steering wheel 80mm of "dish" $70

sdc11553i.th.jpg

Nardi Wheel $220 Each

sdc11554w.th.jpg

Steering wheel bought from Japan in late '08 $100

sdc11556g.th.jpg

Nardi Wheel $220

sdc11558r.th.jpg

Turbo time with loom from a 32

sdc11559b.th.jpg

FIRENZA 245/40/18 pair $120

sdc12032c.th.jpg

5 Stud none type M Wheels from R32 GTS-T, 2 with brilliant tyres, 2 are bald $150

sdc12033x.th.jpg

sdc12034o.th.jpg

Sparco Wheel x 4, All tyres are of no use, 17"X7.5 $150

sdc12036.th.jpg

Any 34 owners interested in a rear strut brace? I have this: http://www.justjap.com/store/product.php?productid=18327&cat=394&page=1

Its brand new, only test fitted by previous owner, then sat in my shed. Paid full retail for it, they are on special with JustJap for $75 + post, come and pick it up for $80!

Contact: 0402 902 759

Location: Adelaide

R34 Parts

Door cards $150

sdc12044h.th.jpg

Turbo Back Exhaust , standard dump, 3" front, cat, 3" catback with cannon and 4" tip $450

sdc12045l.th.jpg

sdc12046bm.th.jpg

R34 Passengers guard $150

sdc11752.th.jpg

sdc11751u.th.jpg

R34 Rear Seat $80

rearseat.th.jpg

Glove Box $50

sdc12042tu.th.jpg

Complete Boot Interior, Mat, Side panels, Black plastics $150

KYB Buzz Spec Suspension, damper adjustable $500

sdc12056.th.jpg

sdc12057n.th.jpg

sdc12059.th.jpg

Front Reo $150

R34 Bonnet $300

sdc11483g.th.jpg

Front strut brace $100

Rear parcel shelf $50

Dash + Airbag $200

Interior rear quater panels, Pair $100

ECU cover $30

R34 Brakes

Front and Rear

Calipers and Rotors

$650

sdc12051u.th.jpg

sdc12052u.th.jpg

sdc12053q.th.jpg

Brings tears to my eyes seeing my old 34 in pieces :'( Any chance you have the speakers man??

Fund my rebuild peeps!

R33 GTR REAR strut brace, $130.

R33 GTR REAR swaybar, $60.

Standard R33 GTS-t swaybars - front and rear - $30 each.

PAIR of 5x114.3 rims, still plenty of meat on the tyres, white, 5-spoke, gutter rash but decent offset. Perfect for skidding. 17x8 I believe. $250

RB20DET reflashed to suit Series 2 RB25DET w/ 12psi, cooler and exhaust $120

Also EOI - Genuine Bride Zeta II on Genuine R33 Bride rail, worn on drivers side bolster but seat is still perfectly usable $450.

100_06902.jpg

Edited by Bridgy

Hey, stripped the last of the R32 (2dr). All these bits are $5 each. Come get em or they're goin to the dump. :)

All gotta go

Msg anytime: 0421666324

Sam

Is that the entire boot trim?

Anyone want my AIM Mychron Light lap timer.

Bought it second hand about 12 months ago and haven't used it but since i don;t have a running car at the moment it's probably more important that i get my car running than have a $300 lap timer sitting on my shelf.

Price $300

Cost me $350

MyChron-Light-TG-small.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
    • OK, now we are ready to get started. You need to remove the air boxes on each side for clearance. The cover is straightforward, undo the clips on the top and lift the front cover out of the rest of the housing. If it is tight you can remove the air filters first. The rear section of the airbox is trickier. On each side you need to remove the Air flow meter wiring which is held to the airbox with a clip; you need to get behind the clip on 2 sides if you want to remove it without breaking it - unclip the harder side and pull on the clip with medium force, then unclip the easier side and it should pop out The airbox is held onto the intake hose with a spring clamp; you need to get a flat bladed screwdriver behind the spring on both sides and pop them outwards. When you have got them in the right unclipped place they will stay there and the airbox slips out pretty freely. Put a rag in the intake to prevent anything getting dropped in there, and also to prevent you seeing that the turbo seal is leaking oil (as they do). Then. The top of the radiator is held by a steel plate, it is secured by 2x10mm and 2x12mm headed bolts . Remove them and remove the plate Also grab the bushings that hold the radiator to the plate on each side so they are not lost!
    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
×
×
  • Create New...