Jump to content
SAU Community

Recommended Posts

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

For sale rx4 4 door/ 929 coupe package deal

$8500 ono

1974 rx4 4door flat nose model

The good.

Mark mills built 13bt mild port

s6 rotors 2mm scr seals

s5 turbo

microtech lt 10

Bosch coil pack

3"dump ,exhaust hooker muffler

PWR radiator

PWR intercooler

spl thermo

s4 gear box /rx4 bell housing H/D organic clutch

bosch 044 carter pre pump and surge tank

also comes with 700cc sard injectors not in car

16" wantabee rims

car made around 185rwkw on 6-8 psi engine has done less than 10000 since rebuilt and never boosted

the bad the body is rusty and but still registred and defect free

Thegood complete 929 coupe rolling shell just minus engine has rx4 flat nose front end conversion in primer very straight both cars as i bought them very sad to see them go but baby n.o. 3 on the way not much time for so many projects.

So some of them have to go i suppose.pls pm can txt pics

bump

For sale D1 Drift seats brand new, only 2 days old.

Was going to put them in my 34 GTT but can find seat rails to match

and not paying 500 big ones for custom ones, (thats each).

$500 for both, they are black and grey in colour,

They came will universal rails so come take them as well.

PM me if you are keen

Need them gone asap so i can get newish standard ones

Pics if you need them.

19x8.5" +35 speedy cheetah

5x114.3 suit ford/nissan/toyota.

Bought for my BA XR6T but have decided to put money to new FMIC & Tune rather than looks.

Good condition, some gutter rash but only 1-2cm marks Selling as bought, boxed and ready to go

$690ono

9637mg9_20.jpeg

9067cn9_20.jpeg

1744b63_20.jpeg

3636k52_20.jpeg

580859i_20.jpeg

Need this stuff gone! make an offer on anything.

Stainless steel top mount manifold suit rb20/25

MTX jackhammer 12" 250wrms in ported box

kicker 400wrms mono block amp

standard rb25 turbo

50mm external wastegate (4 bolt flange)

intercooler piping suit rb25 with standard position turbo and crossover

2x 14" steelies with good tread suit honda

dell 24" full HD pc monitor, hdmi etc.

PM if you're interested :) cheers

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

Carbon canister?

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

How'd they look on the GTR when you had it?

Stainless steel top mount manifold suit rb20/25 with 2 bolt 38mm wastegate flange (BRAND NEW) $200

Stainless steel top mount manifold suit rb20/25 with 4 bolt 50mm wastegate flange (USED) $300

MTX jackhammer 12" 250wrms in ported box $100

kicker 400wrms mono block amp $100

standard rb25 turbo $125

standard S1 RB25DET coil-packs $30

50mm external wastegate (4 bolt flange) $40

intercooler piping suit rb25 with standard position turbo and crossover $50

2x 14" 4x100 steelies with good tread suit honda $30

Open to offers guys, need this stuff gone. All in good working order.

Pics on request.

PM if you're interested or txt me on 0425366582 :) cheers

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

Real Garrett GT3071R, good condition, next to no shaft play. Rear blades are mint, front blades have some very small chips in a couple of blades but doesn't affect the performance of it. Came with a car I bought but doesn't suit my needs. Already off and ready to go, can throw in a stangard manifold with a spacer welded to it to suit the turbo but will need something sorted out to run an ex gate.

Garrett GT3071R CHRA

(Product Code: 700177-5023)

Description:

Turbo Charger model

GT3071R

CHRA

700177-5023

Compressor Wheel Inducer Size (mm)

53.13

Compressor Wheel Trim

56

Turbine Wheel Exducer Size (mm)

54.98

Turbine wheel Trim

84

$850 ono

May swap for R32 suspension parts (except coiloves), oil cooler set up, or just something of interest.

IMG_20120718_112126-1.jpg

IMG_20120718_112051-1.jpg

IMG_20120718_112152.jpg

Edited by Import S13

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...