Jump to content
SAU Community

Recommended Posts

Hey all :)

I own a 1998 Nissan Skyline R34 25GT with auto transmission, and whenever i tried to do wheel spin, it just can't get it up.

I have been told that traction control is on, so is there a way to turn it off? like there a switch i haven't seen? or yeah, someone please help me.

xx Ben

Link to comment
https://www.sau.com.au/forums/topic/354391-turning-off-traction-control-on-r34/
Share on other sites

imag0083v.th.jpg

Should be a on/off switch by your left knee under the steering wheel. Pic is from my Manual 2000 GTT, im assuming the auto is no different.

yeah i have that switch, when i flick it, it comes up saying 'snow', is that the same as yours?

There might be a fuse box that can access and pull out the fuse for traction control..? Try losing traction at a wet parking lot by making slow doughnuts, I think a light should blink in the dash to indicate that the traction control is working/not working.

There might be a fuse box that can access and pull out the fuse for traction control..? Try losing traction at a wet parking lot by making slow doughnuts, I think a light should blink in the dash to indicate that the traction control is working/not working.

oh yeah i guess i could try pull out the fuse for traction control. i just thought there was a switch like other cars, may be wrong tho.

On R34s traction control is organized by modulating secondary throttle plate inside the throttle body. Look at your engine. Locate throttle body. There is no secondary plate actuator in there - none of N/A R34 have them from factory. Hence there is no traction control.

On R34s traction control is organized by modulating secondary throttle plate inside the throttle body. Look at your engine. Locate throttle body. There is no secondary plate actuator in there - none of N/A R34 have them from factory. Hence there is no traction control.

ohhh thanks, i'll give that a look and see what i can do. :)

Yep, thought NA R34's didn't have traction control, what on earth would they need it for? This thread is a perfect example for why they would never need it. The OP is TRYING to get wheel spin and can not achieve it.

Yep, thought NA R34's didn't have traction control, what on earth would they need it for? This thread is a perfect example for why they would never need it. The OP is TRYING to get wheel spin and can not achieve it.

well that sucks, i would have been nice if i could get wheel spin, maybe not then :P

Maybe you should try to induce some wheelspin using tallspeed of your auto box? press both pedals, it should rev up to ~2000 or 2500, then release brake pedal. If that does not help, then either you'll have to live with no wheelspin or put on some narrow tires or add ridiculous amount of camber to the back.

Note that stallstart heats up ATF pretty fast, so don't hold both pedals for a long time and don't repeat this exercise very often.

Added: according to factory manual, stall speed for RB25DE is 2350-2550 rpm. FSM does not recommend holding throttle pedal for longer than 5 seconds and also says to press throttle gradually. It also says to release throttle as soon as stall speed is reached, but you should release brake pedal instead and floor your throttle :P

Edited by Legionnaire

go to a parking lot

right/left hand down full lock

floor it and see if the orange T/C / SLIP blinks in the middle of the dash?

what you mean by 'right/left hand down full lock'

and what if T/C or SLIP comes up?

You won't see it, as R34 N/A's do not have traction control. At all, period. It just doesn't exist man.. I.E it is always off.

ohhh okay, thanks man :)

thats all i wanted to know

  • 2 years later...

i have a 34 GT-4 (the non turbo 4 wheel drive model) and im wondering why i have a TC button on my dash if i dont have TC? i dont have the on off switch so im just guessing that they made the same cluster for all manual non turbo models but why would they take the turbo gage off and leave the TC on?? im confused

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...