Jump to content
SAU Community

Recommended Posts

Wow that is a full on turbocharger Bobby I just realised...76mm inducer and 102mm exducer that should be nearing a four figure hp output.

It's a 68.5mm inducer and a 102mm exducer trim 44 this comp wheel is for high pressure ratio I'd like people to copy this theory. Currently modifying a hks turbo for a friend I'll post some results I won't say for now what I'm doing to it once done I'll let people know a nice mod for hks Kai

  • 3 weeks later...

Seriously thick walled wrist pins you've got there! They look to be at least 1-1.5 mm thicker than a standard pin.

I would have thought you would be using titanium rods too for the deck height you are running as well with this engine.

Is that a GT500 2.8lt crank?

Also, whats with the banjo fittings on the back of the head? External oil supply, rather than through a block restrictor?

Bobby, are the photos that you had of the head showing the water/air reliefs still on this thread? If not, can you post them up again please?

Looks great, like the red :) is that a anti-oil friction coating or it just looks cool?

Seriously thick walled wrist pins you've got there! They look to be at least 1-1.5 mm thicker than a standard pin.

I would have thought you would be using titanium rods too for the deck height you are running as well with this engine.

Is that a GT500 2.8lt crank?

Also, whats with the banjo fittings on the back of the head? External oil supply, rather than through a block restrictor?

Hi Ian,

John wanted the thickest wrist pin.

The rods are crower and this should be fine, and wont stretch.

Banjo fitting are the external oil supply that we can control how much we want in the head. Trevor the motor builder has said he wants to see more then std in the head.

Yes the crank is a Gt500 2.8L

Bobby, are the photos that you had of the head showing the water/air reliefs still on this thread? If not, can you post them up again please?

Looks great, like the red :) is that a anti-oil friction coating or it just looks cool?

http://www.skylinesaustralia.com/forums/topic/355547-r34-gtr-build/page__st__360

Yes that red is the Anti oil friction coating

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...