Jump to content
SAU Community

R32 Rear Wiper Removal

RBnub

By RBnub,
in Exterior & Interior Styling

 Share

Recommended Posts

stealth01 Collaborator

stealth01

Posted
Posted

Looking for the best solution to getting rid of the rear wiper blade without replacing the rear glass. Is it possible to just remove the bulky horrible wiper and get something to plug the hole up In the glass.

Use this to plug it up:

http://www.rhdjapan.com/moonface-rear-wiper-hole-cap-37mm-50291

  • 1 year later...
Gus_32 Contributor

Gus_32

Posted
Posted

I know this is a thread dig but i couldn't find the answer and i thought it'd be better to post here than to make another one so in the future when more people search it leads still to the same one topic..

to the question..

pretty much exactly the same as the orignial poster but the link to RHDJapan for the rubber plug has expired.

Would anyone know where to purchase one and what is the size that i require?

  • 2 years later...
sleeper_gtr Enthusiast

sleeper_gtr

Posted
Posted (edited)

Hey I know this was a long time ago. But bwrgtr did the 30mm one fit well? Also how thick was it? I found another one on rhdjapan moonface brand which is a different product code OWC030 which is 30mm for a glass thickness of around 3-4mm. Here's the link for other ppl who are looking for this currently

http://www.rhdjapan.com/moonface-racing-rear-wiper-hole-cap-30.html

Also would I need a plug for the wiper motor?

Edited by sleeper_gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Duncan's V37.......race car?

      By GTSBoy · Posted

      I hope it's actually possible. This is a write off in insurance world.
    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      Yup. 2-way with shallow ramp angles. Still works.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...