Jump to content
SAU Community

Recommended Posts

because your popup display can do 1080p :P

ohh i guess 11 and 7mate are HD only. so i take that smart ass comment back lol

When I installed my reverse camera I decided to connect the pop up display to the tuner as well as my double din Eclipse. I figured when reversing it would be better to not look down too much.

It took me a minute to work out why the pop up display looked so crap (NTSC - check, ahh resolution). Funnily enough, when I dropped it down to 480 lines (I think) and it worked, the HD Eclipse still looked pretty good. It's not quite as easy to read the headlines scrolling across the bottom of the screen as it was in 1080p, but in general it's OK.

I figured it's only a few remotes clicks away from restoring the HD if it ever ticked me off.

RE the HD channels, the tuner still receives them OK. It just transmits them to the screen in whatever format you require.

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

great info guys.

commsman: in your travels, have you come across a tv tuner with an hdmi receiver? I'm keen to run hdmi out of my phone and into the factory A/V system. The phone (samsung galaxy s, soon to be a galaxy s 2 ) will also do RCA via 3.5mm, but it's a noisy signal that i think would need particularly high impedance inputs to counter this :\

edit: forgot to mention, I'm aware of the hdmi to rca convertor boxes available from ebay, etc, but with the A/V signals already bouncing through so many boxes, i'm keen to avoid any extra equipment if possible...

I've only ever seen HDMI out on car tuners, sorry.

However, I can ask the manufacturer if they could do one for you. This exquisite one (sorry, I just love it on their brochure) never came with the AV input originally. That was a mod they did for me so we could run other devices thru it. They modded 2 samples and had them to me to test in about a week!

Let me get back to you on that one.

Edit - can you do without the AV input? ie if they changed it so that the HDMI connector was an input (not output) and it didn't have the AV input would that do? Or do you want it as it is PLUS a HDMI input?

Edited by Commsman

That's just typical. Installed my Asuka a couple of months ago and now this one comes along with HD- the Asuka is only SD. Hmm.... might have to get one....

Great looking tuner and good price too Leon!

I'm glad you think so. Many hours over many weeks trying to get good hardware at the right price. I take it the one I sent you has arrived?

I've only ever seen HDMI out on car tuners, sorry.

However, I can ask the manufacturer if they could do one for you. This exquisite one (sorry, I just love it on their brochure) never came with the AV input originally. That was a mod they did for me so we could run other devices thru it. They modded 2 samples and had them to me to test in about a week!

Let me get back to you on that one.

Edit - can you do without the AV input? ie if they changed it so that the HDMI connector was an input (not output) and it didn't have the AV input would that do? Or do you want it as it is PLUS a HDMI input?

I think i would probably want to retain the rca input as i want to be able to fit a reversing camera at some point (unless there is another way around this that i'm not aware of) but if there's no way to have both then the HDMI is the one that i need. if you could enquire with the supplier as to whether or not it is possible it would be much appreciated.

thanks

I think i would probably want to retain the rca input as i want to be able to fit a reversing camera at some point (unless there is another way around this that i'm not aware of) but if there's no way to have both then the HDMI is the one that i need. if you could enquire with the supplier as to whether or not it is possible it would be much appreciated.

thanks

There is a way around that.

You can either

1) add another source input into the OEM tuner for the reverse camera

2) fit a relay that switches between the New tuner's input (TV or AUX) or the Reverse camera.

because your popup display can do 1080p :P

ohh i guess 11 and 7mate are HD only. so i take that smart ass comment back lol

Yes indeed. I was going to make a crack about needing hdmi input until I saw that the next comment was any other connection gave poor quality with noise....

Yes, I miss maaaaaaaaaate, 11 and one of the 9 channels- go or gem, whichever is HD. Simpsons, futurama and Knight Rider- does it get any better?

Oh and Leon- what did yo send me? Must be confusing me with someone else :rolleyes:

My 3 drive ac arrived today...without Stagea specific instructions....

Edited by andynogo

There is a way around that.

You can either

1) add another source input into the OEM tuner for the reverse camera

2) fit a relay that switches between the New tuner's input (TV or AUX) or the Reverse camera.

I like the sound of that relay idea :thumbsup:

For the factory system: Don't forget that any cameras or inputs you add on need to be in NTSC as our factory screens only support ntsc. Obviously if you have an aftermarket screen then it's whatever that screen is designed for.

Oh and Leon- what did yo send me? Must be confusing me with someone else :rolleyes:

Sorry, my bad. I didn't send you anything. Tuners have gone out to 3 or 4 guys & I was talking to you about the throttle controller / cruise control and got all confused.

Sorry, my bad. I didn't send you anything. Tuners have gone out to 3 or 4 guys & I was talking to you about the throttle controller / cruise control and got all confused.

:thumbsup: I get confused all the time.....

can't wait for mine to arrive.

It should be there tomorrow, if Aussie post do the right thing. Let me know if I can help with the install.

I've decided to put together some info to help you DIY.

It'll be pretty basic to start with but I'll add more as questions are asked. If anyone else wants to contribute, please feel free to do so.

I've not done a V35 install (yet) so I've borrowed pics from other threads. I hope to have some of my own in a short while.

The steps will be numbered so anyone can add a part A or B etc if sub steps are wanted with more detail.

Cheers, Leon

Step 1 :- Locate your OEM tuner

M35 - LHS

post-76144-0-49654700-1300006892_thumb.jpg

V35 - In boot

post-76144-0-86537700-1300007123_thumb.jpg

Step 2 :- Get 12V & Earth

You can use the 12V that powers the OEM tuner, but I recommend running a dedicated power cable from the front fuse panel (behind kick panel in driver footwell). You are less likely to overload the existing wiring (not really a big chance though) and will have extra capacity if you need more power for other devices later. When you consider that you need to run other cables to the front, you might as well put the power wire in at the same time.

BTW, accessory power is OK. Unlike the Asuka tuner, these don't lose their station memories when you turn the power off.

The earth connection is as simple at putting the wire under a convenient screw/bolt that makes a good connection to the chassis. Use a eyelet style connector on the end.

Edited by Commsman

Step 3 :- Connect antennas

If you have a M35 with factory antennas, cut off the original connectors and combine 2 into one new F-type connector. I recommend soldering the twisted inner conductors to provide greater strength.

post-76144-0-95178100-1300011771_thumb.jpg

The antennas are powered and so require 12V to work. I left mine powered from the OEM tuner (they work OK) but some previous installations haven't worked properly when done this way. It is therefore recommended to connect the power wires on/from the antennas to your new 12V supply wire.

You will need to cut a hole in the side of the plastic cubby hole for the antennas and other cables. Make sure it is in a good position due to the short length. Up high is probably best. A holesaw or even a stanley knife will cut through the plastic.

If you have a V35, you will need to use the supplied powered antennas. These seem to work best when placed on the front & back windscreens. You will need to run a coax cable under the trim on the A pillar and back under the door sill trim panel. Likewise, run the coax for the rear antenna under the C pillar trim and into the boot.

Step 4 :- Connect Infrared Receiver

While you have the door sill and other trim off, lay the IR cable along and place the receiver end where it will be easy to aim a remote control at. Most people stick it just above the passenger side kick panel.

I put mine at the top of the passenger side B pillar so my back seat passengers could easily use the remote. Also, my lead was only 3m long & wouldn't reach to the front :(. I requested 5m long leads for the production models so you can choose the best position.

post-76144-0-23966100-1300012919_thumb.jpg

Step 5:- Connect new tuner to OEM AUX in

Plug the connecting lead from the new tuner (RCA outputs) to the AUX in (white connector) on the OEM tuner.

M35

post-76144-0-16907200-1300018664_thumb.jpg

V35

post-76144-0-42260500-1300018729_thumb.jpg

You can make a cable in about 30 minutes or so by cutting a RCA lead & soldering on connectors taken from an old computer.

I can also send you one that looks a bit like this, though I've since used heat shrink around the whole thing to strengthen it & make it look a little better.

post-76144-0-14647500-1300018570_thumb.jpg

Step 6:- Test operation

In its simplest form, your new digital tuner should now be operational. By selecting the AUX on your front screen/buttons, you should see the setup menu and be able to configure your new tuner (using the remote) to output NTSC, set the correct resolution and scan for TV signals.

Stay tuned later for further steps that will make your TV operation easier & more enjoyable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...