Jump to content
SAU Community

Recommended Posts

Hi guys,

Im in the position to buy a GTR r34 at the moment and I've found two that a reasonably priced and are in my price range. ill give you a little bit of infomation about each

The built one

1999 GTR Vspec

- 60,000Kms on the clock

- its been built with forged pistons and rods, but running factory ECU and turbo ( it was rebuilt cos motor was blown), the builder is just a local mechanic in a small town with very little experience with RB's

- the owner doesnt seem to know much about this car, or anything about the build. (typical excuse if there is something wrong with the car, pretend like u know nothing)

- car has a big dent on the front bar, and keyed on the side (requires about 2-3k paint work)

- has a few light mods like boost controller, exhaust, coilovers

- in the small town i dont even know if they have RON 98 lol

The standard one

- 1999 Non-vspec

-non built engine

- completely standrad with 50,000Km on the clock

- good condition, i know the import broker that imported the car from japan, so i know the rough history

now the standard one $7000 MORE expensive than a built one

my question is which one would you take? i know buying a built one that is built by a non experience mechanic is a gamble. but the price different is BIG.

my mechanic said he would take a standard GTR r34 over a built one anyday simply because he doesnt know how much attention was put into the built and you dont know if they did anything wrong until it goes bang and you open it

If i were to buy the built one, i would put it on a dyno and get comp and leak down test done, and a thorough inspection.

so i need i need you advice guys.

cheers

Edited by vspecR
Link to comment
https://www.sau.com.au/forums/topic/356847-r34-gtr-to-buy-built-or-standard/
Share on other sites

Standard on for sure. I mean you are saying that there is about 3k to spend straight up on the paint work so that only makes the car a 4k difference then you have the 10000k difference on the odd which is nice.

And all round the stock on probably is a better base to start working on. As you said you know a bit about the history of the stock one and you never know what other problems the owner of the built one is hiding from you

So to cut a long story short I would buy the stock one which is in better condition :-)

That's my 2c

Can source receipt of the built one, but it's the quality of the work from builder that I'm worried about.

Yeh I know logically the standard one is safest, but tempted to get the built one as it hadmore potential.

Sorry rather not state price

Definantly the standard one!!

Unless you know the builder and all the other associated facets of the car i would be very careful befor handing over the coin..

You have to ask the question why was the engine blown in the first place?

Standard mate , you would only buy modified if the owner could tell you in detail >>>

The modifications and in detail who did the work . sometimes its worth spending extra , to save down the track !

Standard one was built because previous owner overboosted it, not sure the detials, but that was the reason

The built one's owner builder can tell me bits and peice of the details. i have the list of parts used, but like i said, im worried about the builder's work, not the parts

ahhh so hard to decide lol. The built one also has my preferred colour, and its Vspec

what could i possibly do to make sure the engine is fine?

cheers

Edited by vspecR

Option 3: Bargain hard on the built one, get a good deal then get a standard strip down done and refresh the engine with the money saved. An engine refresh won't be too much especially if you can do a bit of it too plus if the motor's already been built recently you can just resuse the pistons/rods etc etc.

You'll probably end up paying slightly more this way than the standard non built one, but then you have the knowledge and guarantee that the engine will be fine if your mechanic is good.

Don't forget the non built standard one is still afterall a 10+ year old motor that was built as a sports/fast car..it very likely hasn't had an easy life. You buy a sports car to drive it sportily or even harder.

Paintwork can come later, take care of mechanical stuff first imho. Besides it's only a keyed jobbie, you can get some properly mixed/matched colour and touch up the mark till you're ready to get it done properly. Or if the key mark is not even that deep, a propfessional detailer will be able to get rid of 90% of it, making it so to see it, you really need to get up close and look at the spot/know it's there.

Standard one was built because previous owner overboosted it, not sure the detials, but that was the reason

The built one's owner builder can tell me bits and peice of the details. i have the list of parts used, but like i said, im worried about the builder's work, not the parts

ahhh so hard to decide lol. The built one also has my preferred colour, and its Vspec

what could i possibly do to make sure the engine is fine?

cheers

That does make it hard to choose , the decision always comes down to colour . Get your mechanic to go right over it , pull the wheels off , compression test . Check it out fully . But i would wait for another one if in doubt ! or pay 7k more !!!!!!!!!!!! GL

Edited by NISSAN GTR

- its been built with forged pistons and rods, but running factory ECU and turbo ( it was rebuilt cos motor was blown), the builder is just a local mechanic in a small town with very little experience with RB's

- the owner doesnt seem to know much about this car, or anything about the build. (typical excuse if there is something wrong with the car, pretend like u know nothing)

MY COMMENT - BELOW

If i were to buy the built one, i would put it on a dyno and get comp and leak down test done, and a thorough inspection.

YES-S-S-S

My car is being upgraded now.

If I were to sell it, I'd even introduce the prospective owner to the technician/builder/tuner after showing itemised receipts for the wk.

I'd only have my car upgraded by a very experienced technician.

All the best!

Don't by either

wait for good deal, where you can buy a Build one for that money "it's matter of time"

if you buy the Build one, it will go bang again due to poor quality of work

if you buy the standard one, you will realize how expensive it is to build RB to and modify in general, so you will always think about build one and why you did not buy it

so neither will be good

:blink:

ahhhh dilemma

i didnt want to say it, but the built ive negotiated to 35k....for R34 GTR vspec... i know most would say its lemon just based on the price. but i genuinely believe the owner is only selling it cheap due to paint work and is in debt

its hard to let this bargain(if the engine is quality build) go!

Touge- i like your suggestion, i will be lookin into that option. perhaps i can drive the built one how it is now (leave it at stock power) and look at refreshing it when im chasing more power. something around 350-380kw

and i agree, the standard one's engine is a 10yr old + engine, i dont know exactly what its gone through either.

Edited by vspecR

35k?

Def get absolutely everything inspected.

Even if engine goes pop, its 8 to 10k to rebuild at a performance place and you know you've got a R34 GTR Vspec running mint.

Make sure you run the vin too to check original colour and revs check it.

Yeh its a real bargin, and ive checked everything (VIN and REVS) as thorough as i can. I think im heading towards the direction of the built one.

Gonna get it checked out next week, fingers crossed, considering the inspection is gonna cost me 400 before i even buy the car lol

Don't care. Better to spend that money now than fixing a big list of repairs you hadn't budgeted for...

Besides, you will always find something more and can negotiate into sale price = free inspection.

Also get paint thickness of entire car done so you'll know if its been sprayed before.

Are you in Perth, and does the car your looking at, have terrible tail lights?

Edited by Ten Four

Yes I'm in Perth, but I think the one you're talking about is sold. Plus is looks horrible lol. Anyways after speaking to an import broker I'm looking at maybe importing myself now, price of r34 GTR can go as low as 38k landed :) thanks for the help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...