Jump to content
SAU Community

Recommended Posts

Hi All,

Currently importing a R32 GT-R and I want to get everything sorted well and truely before the car gets anywhere near Australia. Geoff from Prestige recommended the following companies to do the necessary modifications to comply with the ADRs (the price they quoted me is listed):

Southside Performance Imports: $1200 + blue slip + rego.

GM World (Auto Disposals): $2000 (inc blue slip) + rego.

Sydney Compliance Centre: $1500 (can't remember if it was inc/ex blue slip).

Has anyone had experience with those three companies? Was it good, bad, indifferent? Anyone who has used a different company, feel free to post the details plus any comments about them.

Thanks guys!

Lucien.

Edit: Change subject so its clearer what I mean.

do you know what the compliance plates are worth for r32 gtr's, or how long it takes to get them as i heard there was a bit of a wait for plates.

Last time I checked they weren't avilable, but since I bought an '89 GT-R I didn't bother following it up. I would expect plates to be quite expensive as they are (likely) rare with few if any workshops doing R32s. With that in mind, I would expect $4000-ish.

LW.

$2000 ? WTF.

Thats seriously steep. You only need to change a few things to get the car ready for blue slip. $2000 for these simple mods plus Rego costs is outrageous

Yes, I agree $2000 is stupidly high, hence I was hoping people might be able to suggest some other places :P Who do you plan to use Blitz?

LW.

dont forget there is still a fair bit of work involved in compling these cars. they need door intrusion bars $350 engineers report $400 blue slip $77.10 filler neck and cap. $50 side mirror $30 child restaints $60 plus high mount stop light $60 plus labour to do all this.

i get all my cars done at grey imports in annandale

nath normally chargers 1200-1300 engineered (you still need blue slip, rego)

does a great job and he currently hase 6 1989 gtrs getting compiled as we speak( ive complied over 10 cars with him and i highly recomend his work)

if you want nath's number give us a bell and ill give it to you

pete

0409226626

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...