Jump to content
SAU Community

Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Why don't you try to bend some PVC piping out on the ends to create the shape of the duct and then paint it black. It is really easy stuff to mold with some heat. :)

Yeah, I'll look at rolling some sheet to the right shape once I receive the bar. If I can get it to look good, I'll probably go that way.

Had a look through other pieces of paper/brochures etc for any other identifiying part number, but no cigar. Page from the Parts bok attached (Same as Cam's Fast search)..

Aero Bumper Parts Book.pdf

Thanks for having a look, that was about as far as we could get too. Appreciate the effort.

Cheers, Dale.

  • 4 weeks later...

Foglights needed for Aero bar? :thumbsup:

Auction Ends today:

http://page.auctions...ction/141644226

Nice find, thanks!

I've got Aaron from IM on the case, looking for the lights & surrounds for me.

Cheers, Dale.

I won these...but now I have a feeling they won't fit on my aero bar without some other parts....arrgh

For the record, they're more or less exactly what bolts into my Kenstyle front bar - I dont have any other parts/surrounds, so it could be okay

I won these...but now I have a feeling they won't fit on my aero bar without some other parts....arrgh

Do the grey blanking plates bolt or clip in by any chance?

I have seen a few that have neither the blanking plates nor the fog lights and there is a frame there with four holes (from memory)

Do the grey blanking plates bolt or clip in by any chance?

I have seen a few that have neither the blanking plates nor the fog lights and there is a frame there with four holes (from memory)

The blanking plates are clipped on I think...Or bolted. Either way they can come off...

I take it that the connectors to operate the foglights should be there?

So if I turn on these foglights they will come on along with the built in foglights?

if you really wanted you could probably wire them to a secondary switch.

you could have only the fogs on then if you wanted.. looks nice imo

Thats what I've got, but mine stay off because its illegal to drive with fog lights on if its not foggy or misty :rolleyes:

really?

It isn't in Vic i dont think..

I think its SA specific, Im not sure how increasing your visibility (Both to be seen and to see) is a negative - but apparently it is :worship:

According to the Department of Transport, Energy and Infrastructure, and I quote:

Drivers can only use front fog lights in hazardous weather conditions. This brings the rule into line with the existing situation for rear fog lights. Use of fog lights in other conditions can dazzle oncoming drivers. Previously front fog lights that dazzled approaching drivers were dealt with as an offence under a different rule.

Thats right, they'll dazzle you. Awesome. Thanks government.

</Rant>

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...