Jump to content
SAU Community

Recommended Posts

Sucks to see the car go Adam! You did a good job on it! Have to say how fun is Sydney Motorsport park!!! We went there for the top gear festival and was so fun haha

The colour almost looks the same as our corolla! Looks awesome in the sun!

  • 8 months later...

shitty-side-skyline.jpg

Hey, so it’s been a while huh? I’ve been a ghost for quite some time, on here and various forums. I lost my interest in cars for a while and funnily enough I started playing car roulette again.

The Skyline was sold to Jeff as the mortgage is more important than a car I’ll barely drive. Shortly after I sold the R33, I scored a job as an order entry/business to business support clerk for one of the worlds largest navigation companies. With that in mind I set out to get a fun simple daily, so I went back to my roots. I bought a Mazda Roadster.

clean-Mazda-miata-MX5-Roadster.jpg

It was a very neat example, and a fun car to drive. A perfect base for a simple, enjoyable car. But things went another way when Benny decided it was time to move on himself. He kept nagging me about the Stagea and how I should be reunited with it. For a while I just brushed it off but when I started loosing interest in the Roadster for an IS200 … I thought about the Stagea long and hard.

The conclusion I came to was I put too much time, effort and money into it and I really couldn’t be bothered (nor do I have the luxury) to do anything that extensive to a car again in the near future. It was at a point where I could tie up loose ends and enjoy it for what it was. So I gave in, the Roadster went on the market and sold shortly after which made my reunion with the Stagea set in stone.

run-it-hard-stagea-is-back.jpg

Although it’s back in my grasp, it’s not how I remember it. The first owner took a few things off it like the brakes, and suspension components along with the R33 LSD. Over time all these things will be rectified when I can find the time and/or money to do so. There are a few other little details that I’ll be fixing along the way too.

One day, I might even be out on the track again getting this thing sideways, at least I hope so.

  • 1 month later...

Spotted this @ Mona Vale around 5:30 tonight, walked into the sushi train and was spotted by a bloke I used to work with at Supercheap and is the current owner of this??

He has been through more cars than I eat meat pies xD. Hope he looks after it, great looking car in person.

Edited by M35woah
  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good tips, will get on those tomorrow. When doing the maintenance I did move a few of those connectors around, and things that are old tend to not like moving around. (Like me).
    • Don't try it. It will be shit. Better chance of damaging the engine than gaining any knowledge about the old one. Maybe, but unlikely, especially if the O2 sensor is working. You can use NissDataScan to look at the stock ECU.   Cleaning the AFM is seldom necessary and seldom helps. The R35 coil & loom conversion should eliminate dud coils or plugs. But as you still have misses - look to the plug where the coil loom connects to the engine loom, and the CAS plug. Need quality connections there. Also look to injector plugs. And the AFM plug while you're at it. Also look to whether your injectors are clean and flowing evenly. Get them out and onto a testbench.
    • Good to know, I feel like I am in for a rollercoaster ride that looks like a sine wave. 
    • You'll fit right in. Acceptance is the first step.
    • Hey folks. I've been lurking and browsing the forum for a while, since I got into my head that I wanted a skyline. Having purchased an overpriced completely stock GTT, (only "mods" it has is HKS pod filter and catback) now that it became legal in the US, it was all glorious and sututu noises here and there. But then I wanted to do things right and went to do basic maintenance. After all the fluids, filters done, I did the spark plugs, that's when the problems started.. First the car started spluttering at around 4.5k RPM. Which I gapped down the new plugs and that solved the sputter there, but the car now always misfires at idle with pops when lifting off and shifting 2nd to 3rd. Similar to the issues in this recent thread. I've been banging my head against the wall, reading the threads here and trying suggestions for a couple months now, so decided to start this one to explain exactly what I tried and what is going on. The symptoms of the issue: Idle and low revs misfiring intermittently. You can hear the exhaust tone change and the shakes on the shifter knob. It happens frequently, but doesn't seem to have a rhythm to it. Pops when backing off throttle. It pops and or burbles almost feels like it spits fire when it pops. (Happens mostly in 3rd gear at around 2k RPM). When under load and after 6k RPM, it also pops when shifting from 2nd to 3rd. There's a ticking noise at around 2k RPM in 2nd gear going downhill, seems unrelated though but I am out of educated and downright dumb guesses. Not noticeable lack of power when putting the car into load. The attempted diagnosis and solutions: Unplugging coils when the car is running This did nothing to change the idling and tone shift for every cylinder. Checking the exhaust headers with thermometer They all are within what I'd say it is margin of error of the laser thermometer New spark plugs Tossed two new sets, copper, iridium and using the old ones, still misfiring, even re gapped to 0.8mm, still same thing. MAF cleaned with the "specific" spray cleaner No changes in the issues what so ever. Brand new loom and r35 coil conversion (was going to add the r35 coils anyway) car runs arguably better, still misfires, but seems like does less frequently. Placebo? Code 21 now being thrown, thanks nissan gods. Removed the CAS to check the shaft for play or anything. CAS seems all fine, nothing that indicates any issue, visually speaking. Things to attempted next: Ordered a new MAF (chinesium from Amazon, to be able to return regardless of result). Fuel with proper gas, maybe it is this California water that they sell as gas that is to blame? Plugin the link ECU and check the info using the built in base map. Go back to BMW and eat my rob bearing breakfast without milky oil mixture.   Do any of you have experienced anything like this or have any suggestion?
×
×
  • Create New...