Jump to content
SAU Community

Recommended Posts

  • Replies 155
  • Created
  • Last Reply

Top Posters In This Topic

Exact same as R32.

Universal sensor, but the plug is same as R32.

If the plug isn't a direct fit, then the middle wire is signal, and the 2 outer wires are 12v for heating the sensor when cold (which you don't really need).

As long as your loom is from a DE, DET or 25DE the plug should be direct fit.

20E only uses a single wire sensor.

http://www.kudosmotorsports.com/catalog/ngk-ntk-lambda-sensor-oxygen-ntk-nissan-skyline-r32-gtst-gts4-gts25-rb20de-rb20det-rb25de-p-42.html

  • 5 weeks later...
  • 3 weeks later...
  • 1 month later...

Hey guys

nearing the end of finally getting my laurel finished and on the road, just wondering what i can use for a window washer bottle if i cant find a laurel one? and my windscreen wiper motor brother its little plastic ball joint, are all nissan ones universal?

And same with overflow or should i just get any random nissan overflow and make a bracket to hold it?

  • 2 weeks later...

hey guys im new on this site and recently bought a rb20det ceff anyway long story short i have come to the conclusion that my igniter pack(part number:2202058s01) (black box that sits on rockercover) has shat itself. is there anyother igniters that will work on this car (not phased about having to change plugs thats no issue and if so possible places i can find them? thanks guys

Cefiros come with both series 1 and 2 RB20s.

The square shaped plug on the ignitor module is series 1, series 2 has a same sized plug but the shape is a bit more round on the corners.

Hit any local Jap parts wrecker and they'll be able to sort you out.

Generally, S1 RB20s are found in R31s, S2 in R32s.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...