Jump to content
SAU Community

Dash gauge pod 3x58mm & GReddy water temp gauge

tridentt150v
 Share

Recommended Posts

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

water temp sensor, wiring and radiator hose $50 20% to SAU

I'll chuck in the old oil temp gauge, it is likely repairable.

Sorry blew my oil temp gauge on the weekend, so I have used my water temp gauge [they are the same gauge, only the sensors are different].

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

To the left of the dash cluster, on the dash and back off the edge by about 2.5 cm.

The rolled up lip actually mates up with the hump of the gauge cluster.

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

No, it is the finish. It is an imitation vinyl finish, sort of like on your dash, that dimpled type of texture. All you have to do is check yor mounting postion, cut the holes out for your gauges, and paint it the colour of your choice. A really simple job [i just did it with another one on my 'line].

You'll probably need a hole saw and a small grinding wheel to cut the holes out, and a can of vinyl spray paint. You may need either screws, double sided tape, or urethane [Wurths make a bloody good one that sets and holds well, used it heaps for veilside type kits].

  • 2 weeks later...
PranK Grand Master

PranK

Posted
Posted

trident - I am kinda keen on the gauge holder too - Can you email me pics of yours fitted too??

[email protected]

Thanks mate!

Oh, and why so much for a Series 2 ?

Christian

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

blx and prank, pics sent, knore, I could if your really keen, but you will loose resolution, that is why I'm only emailing the extra photo's, let me know what you want to do.

I've posted a pic of mine fitted [well will today].

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

I don't think it is, I think it will fit a SI, BUT I don't really know [maybe you can help here].

I'm in a town that has one skyline - mine, I can't check that sort of thing out.

I ordered it for a SII, and I know it fits a SII, so I stick to what I do know [which isn't much I gotta admit].

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...