Jump to content
SAU Community

Recommended Posts

  • Replies 386
  • Created
  • Last Reply

Top Posters In This Topic

Hey mate, got the coil pack harness? If so is it in good nick?

i do but unfortunately i cut it from where it meets the firewall - i only have the front half of the harness with all plugs

hows it goin? you still got the passenger side window switch and front subframe? if so how much to post to 2620? cheers. oh and do you still have the dash clock also?

hows it goin? you still got the passenger side window switch and front subframe? if so how much to post to 2620? cheers. oh and do you still have the dash clock also?

passenger switch & dash clock are sold

subframe is still here :)...freight is $35 to your door (due to the size & weight of it)

another update, as below!

1. dtm rush wheels 18x9.5 +25 offset with kumho tyres 70% tread (1 damaged wheel & repairable by "Magman" for under $100) – price drop $650

2. 17" forged Work BRS Poison wheels 17x9 + 29 offset with bridgestone tyres – price drop $350

3. factory triple gauge in centre console – $70

4. 2 x earl's fuel filter with 5/16 barb push on fittings – price drop $15 each

5. front sway bar with linkages & brackets - $20

6. rockford fosgate 'punch series' 2 way speakers with additional tweeter & cross over (retail $500) – price drop $140

7. attesa 4wd pump – price drop $100

8. hicas pump – $30

9. power steering line - $5

10. radiator overflow bottle - $5

11. front subframe - $10

12. bootlid rubber seal (no tears) - $5

13. power steering reservoir (no cap) - $5

14. rb26 timing belt (has done less than 5000km) - $20

15. factory rb26 harmonic balancer – $50

16. gearbox cross member - $20

17. momo gear knob - $30

18. nismo black urethane gear knob – price drop $70

Marko, Just tried to ring you.. but you didn't answer.

Anyway, have you still got the BOV return pipe that runs behind the intercooler?

parts remaining as below:

1. 17" forged Work BRS Poison wheels 17x9 + 29 offset with bridgestone tyres – $350

2. factory triple gauge in centre console – $70

3. 2 x earl's fuel filter with 5/16 barb push on fittings – $15 each

4. front sway bar with linkages & brackets - $20

5. rockford fosgate 'punch series' 2 way speakers with additional tweeter & cross over (retail $500) – $140

6. attesa 4wd pump – $100

7. hicas pump – $30

8. power steering line - $5

9. radiator overflow bottle - $5

10. front subframe - $10

11. bootlid rubber seal (no tears) - $5

12. power steering reservoir (no cap) - $5

13. rb26 timing belt (has done less than 5000km) - $20

14. factory rb26 harmonic balancer – $50

15. gearbox cross member - $20

16. momo gear knob - $30

17. nismo black urethane gear knob – $70

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...