Jump to content
SAU Community

Recommended Posts

Just looking at plug and play ecus for my r33 gtr..

And came across this one (link to follow) my gtr just has 3,3/4 inch ss exhaust a k&n panel filter and thats it well all i know of anyway...

Here is link is it a good idea??

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260763289031

Link to comment
https://www.sau.com.au/forums/topic/360255-thoughts-on-this-ecu/
Share on other sites

See thats what i was thinking too (Ie i am worried about our weaker fuels) just wanted to see what others thought of it before i took the plunge....

take the plunge you will love it!!!

just beware the modding bug, im about to swap turbos hahaha had the car a yr :P

I wouldn't risk installing anything like this in Aus, cos of the huge differences in fuels, climates etc between us and Japan. As stated above, best to get yourself a PowerFC or something similar and get the ECU tuned specifically for your engine, better investment to spend that extra bit of cash now rather than potentially destroy an engine.

So you guys reckon i should just save up the extra say $800 ish and get the power fc to be safe??.....

Dont plan on going mental with mds (I cant afford too!!) i just figure it runs rich anyway from the factory so why not make the most of the fuel being burnt and get a better ecu...

Just to note i did a ecu test (Ie the plug under the dashed pinned together etc and only got fault code 55 (which means no faults) i thougth i had a dodgy 02 sensor and thats why it stunk so much of fuel....

The standard ECU tends to go a bit silly/overboard with fuelling when the boost is increased that is why you would be getting a rich mix, best just to play it safe mate - spend the extra to get it done right the first time.

You will not only get more power but way better fuel economy as well - win, win.

hi

the ECU you are looking at on ebay is un-tunable, that is, you cannot edit the tune, update it, change it etc

it is a once only tune and you are stuck with whatever settings are on there

ie its junk and you cant use it

options such as the powerfc, vipec, motec, autronic, nistune etc let you tune the car as you want

so you can buy it, put it in your car, have your tuner "tune" it and set it up to suit your car

remaps (which is what is in the ebay ad) are basically a flash edit of the standard ECU

but the problem is no one can update the flash tune, so its basically read-only

only select few could edit that map, and it wouldn't be worth it

for a GTR, the powerfc is prefect and well worth every $

and you can resell them for the same price you basically but it for

for info on the powerfc check my signature for the PowerFC FAQ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...