Jump to content
SAU Community

Recommended Posts

Hey guys I recently bought myself a r32 gtr with some mods already done to it such as 550cc injectors, full 3 inch exhaust, hks induction kit, boost controller and some other stuff.

it's got stock ceramic turbo's but has been dyno-ed and mapped by RisingSunPerformance (14,5psi) 408,3 HP @ 1 bar of boost

Considering it's going to be used for track days, I dont think the ceramic turbine will last long at 1 bar of boost, so I'm thinking about rebuilding it with steel internals.

But do I need a remap again if I want to run 1,2 bar of boost?

Link to comment
https://www.sau.com.au/forums/topic/360474-remap-after-boost-increase/
Share on other sites

I just got the car 2 days ago, I got lots of paperwork including receipt from RSP

anyway here it is

j6llk6.jpg

speclist far as I know

HKS mushroom filters

Toad alarm system

Nismo lower strutbrace

Poly bushed upper mounts

Rising Sun Performance custom chip

Bilstein dampers

splitfire coilpacks

Denso purple top 550cc injectors

steel braided brake hoses

engine brace

Greddy PRofec B spec-II boostcontroller

3 inch full exhaust

Havent checked the turbo's yet so it may be upgraded ones,

Back to the original question ...

That depends.

If you want to run much more boost, the old mapping might run out of it's load scale.

Meaning the ECU uses the last 'known' 'cell' for ignition and fuelling which might lead to knock or/and lean mixture.

Sounds quite technical .. so in your case I'd say 'yes' ... remap!

u better off getting an aftermarket ecu if u plan on further mods.. a chipped ecu will need to be re-flased each time you make significant changes..

if u handy with a spanner, take off your induction kit and see if can get a better look at the front turbo, maybe able to identify the turbo

also re: dyno graph, do u have one showing what boost was being run.. u based in the uk??

No I'm from Holland, I was told by the previous owner (from UK) the 408hp was at 1 bar of boost, and he got me another dyno read out (345hp or so) wich believed to be at .75 bar of boost.

I will take a look at the turbo's tomorrow,

as for the boost. If i find out it's just stock turbo's then I think the best way is just get them rebuilt with steel internals and not go further than 1 bar.

Always a good idea to get the ecu remapped or at least checked when you up the boost. I increased my mid range by 2psi and when I took it in the tuner said it was pinging heavily and that it was good I brought it in. $2-400 to ensure everythings ok is cheap compared to the alternatives if something goes wrong.

You can get 300KW from the stock twins, but only with a tonne of supporting mods such that you only run 1 bar at most, which isn't the case so definitely you'll want to get a proper ECU if you plan to up to 1.2, and you'll be a lot safer with what you have now with a proper map.

You can get 300KW from the stock twins, but only with a tonne of supporting mods such that you only run 1 bar at most, which isn't the case so definitely you'll want to get a proper ECU if you plan to up to 1.2, and you'll be a lot safer with what you have now with a proper map.

all the supporting mods wont change the fact stock turbo will still need more than 1bar boost to see anywhere close to 300kw.. 1.2/1.3 bar will see it coming close, hell u could up it to 1.5 bar and have it running with little more gain

A valid point,

HP and 'at the clutch' makes for big figures ... :)

On the other side, I see a lot of dyno graphs form OZ with speed in km/h on the X-Axes.

I really don't understand what this is for since I'm interested in at what rpm the engine makes

what power/boost.

Cheers from London ...

Never quite understood anyone who would tune on S_HP when it's a calculated 'guess' as to the clutch power - rather than a 'real' figure at the wheels ..

I guess it makes the owner happy, but beyond that?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...