Jump to content
SAU Community

Recommended Posts

It's says 12mm bungs to allow various configs,

What size are most fittings/lines people using?

I'm sure it could be modified to suit bigger.

You'd need two if you were going serious e85 power, but then youd probably just have a conventional surge setup anyway,

Even two would be still quite manageable and neat I'd think though.

Edited by jangles

stumbled across this. VW/audi world

is ~4 diameter, ~8.5" long

http://www.034motors...nk-p-21527.html

great find and would be such a nice setup. Is 1litre enough though?

I remember talking to Robbie ward about this and his recommendation was a 3litre surge tank?

Read the info!!

Factory feed and return to tank,

Pump to rail, rail to surge.

How long would it take to completely empty 1l with an 044, plus 2m of line, with nothing returning to the surge?

It's designed for far smaller cars, but, It would be a far better option than just installing a pump by itself. It is never uncovered until zero fuel. 2xpumps paralleled would make it a 2l surge,

It's says 12mm bungs to allow various configs,

What size are most fittings/lines people using?

I'm sure it could be modified to suit bigger.

You'd need two if you were going serious e85 power, but then youd probably just have a conventional surge setup anyway,

Even two would be still quite manageable and neat I'd think though.

Dash 6 is the most common, dash 8 for some i think.

It's a well thought out little device, but yes as you said if you're E85 you'd have 2 pumps and a larger tank anyway.

This would suit anyone IMO who's on either E85 or pump fuel and around 350kw because they just dont need that extra pump.

Very good find!

How long would it take to completely empty 1l with an 044, plus 2m of line, with nothing returning to the surge?

Well depends on voltage and how wide the ID of the line is, but you'd be able to have a safe guesstimate of about 30 seconds based on 300lph and a big line ID (enough for 1.5L).

Are the surge tanks really nessesary, 2 nights ago I throught to myself I'm going to put a end to all this talk about surge tanks and test my setup.

Got some decent windy roads around my way, they all private of coarse.... So my tank was low, like the light was on and the needle only just on the E white line.

And I was into it, throwing it into the corners, coming out of them sideways foot flat, up too 140+ and back down to 40 around some of the bends...... Not 1 drop of surge, nothing it was like I had a full tank of fuel..... This is 330kw -5's on 98, but still it was a low tank.

I don't see the need for a surge tank in a street/track car.... And for a track car, just go buy a fuel cell.....

Keep it simple guys, less sht goes wrong.

I mean on the track you would make sure you have over 1/2 a tank in the car before each session, it's really not a hard thing to do, and 100% you'll have no issues....

  • 9 months later...

Old thread bump here haha but I have my pierburg still not installed...I'm going to take the plunge and remove my surge tank with 044 and run this damn pump on its own, submerged in tank.

I kinda feel like I'm going backwards by removing my surge tank with 044 but I don't think I need this setup for ~350kw

Pierburg pumps are good, they are the only pumps that can pull fuel up a hose, which is why I use one as a fuel transfer pump for draining tanks.

A surge tank is not related to a particular power, it's how you drive, hard cornering and drag launches on less than half tank that require engine protection against fuel surge. I would leave the 044 setup unless you putt around town.

Old thread bump here haha but I have my pierburg still not installed...I'm going to take the plunge and remove my surge tank with 044 and run this damn pump on its own, submerged in tank.

I kinda feel like I'm going backwards by removing my surge tank with 044 but I don't think I need this setup for ~350kw

You said it yourself mate, you're going backwards. It's in there, it works, leave what isn't broken, alone!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the re003s’ on my 06 XT Forester Turbo and I highly rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...