Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Just buy an RB25DE and get it swapped in. You'll probably need the exhaust as well.. chat to someone like unigroup engineering, they can go through everything with you.

you'll need wiring loom etc. as well.

Keep the gearbox though... gtst gearboxes are solid.

Edited by SKITTLES

I you just take the turbo out and replace exhaust manifold with a non turbo one and replace where ever ur intake plumbing with just a pipe going to ur airbox you could do that. But don't you will end up with an engine with less power than a non turbo engine since the lower compression ratio. just swap in a new engine and sell ur old turbo one you might even make a a bit of money if you sell the turbo engine.

buy a non turbo R33 then

it's gonna cot you more than its worth to change the engine

It is really hard to find a skyline without a turbo, that is why i was thinking about buying one and taking out the turbo. But i think i might keep looking if it'll cost more

Just buy an RB25DE and get it swapped in. You'll probably need the exhaust as well.. chat to someone like unigroup engineering, they can go through everything with you.

you'll need wiring loom etc. as well.

Keep the gearbox though... gtst gearboxes are solid.

sounds like that could cost more than i would pay for the car, i would be better of to keep looking for a skyline that doesn't have a turbo

Not to mention that, unless you have a fetish for non turbo RB engines (if so. get help), a turbo car with non tubro engine is still a turbo car as far as the laws is concerned. So yes, keep looking for a non turbo one.

That being said, if you found a non turbo car that had been converted to a turbo one, you could legally remove the turbo and put normal minfolds back on and drive it legall, as far as i can tell.

Not to mention that, unless you have a fetish for non turbo RB engines (if so. get help), a turbo car with non tubro engine is still a turbo car as far as the laws is concerned. So yes, keep looking for a non turbo one.

That being said, if you found a non turbo car that had been converted to a turbo one, you could legally remove the turbo and put normal minfolds back on and drive it legall, as far as i can tell.

thanks will keep that in mind.

It not hard at all to find a non turbo skyline. R31s are almost 95% non turbo, there are also heaps of non turbo r34's for around the price of a turbo r33, i see them all the time on carsales.

Seriously if you are on your p's dont bother owning anything to expensive, just buy a old rwd corolla or something and learn how to drive before you spend a fair bit of money on a car.

I did my p's in a ae86 and it was the best thing i ever did, didn't care/matter if i had a minor stack, cheap to run and insure.

If your not on your p's then siff want a non turbo skyline :teehee:.

It not hard at all to find a non turbo skyline. R31s are almost 95% non turbo, there are also heaps of non turbo r34's for around the price of a turbo r33, i see them all the time on carsales.

Seriously if you are on your p's dont bother owning anything to expensive, just buy a old rwd corolla or something and learn how to drive before you spend a fair bit of money on a car.

I did my p's in a ae86 and it was the best thing i ever did, didn't care/matter if i had a minor stack, cheap to run and insure.

If your not on your p's then siff want a non turbo skyline :teehee:.

thanks for that bit of info, will try looking harder for a non turbo skyline. Should be able to find one. Am thinking about waiting til i'm off my p's but i can't help myself but want one already

I'm going to start counting from now on how often this shit gets asked on here.

I will assume you are on your P plates and therefore can not drive a turbocharged vehicle. Buying a turbocharged car and taking a turbo off does not change a thing. The car was still complianced and registered as a turbocharged car. Therefore it is still illegal for you to drive! Why don't you people ever understand this, it is not that hard to understand!

+1 AND P platers cant drive modified cars. Removing a turbo IS a modification!

Only prob with almost all the r34 non turbo models is 95% are friggin auto's. They are cheap though, around 8k.

Seriously save your coin and just wait till your of your p's, you can go nuts then.

yer i'm finding that out too. I will just wait til i'm off my p's will be much easier to get a car when i'm off them

NA 33's aren't all that hard to find. I picked mine up off carsales for 3k with 6 months rego and some minor issues.

Quick look on carsales just now has shown me at least 5 within the first couple of pages.

NA 33's aren't all that hard to find. I picked mine up off carsales for 3k with 6 months rego and some minor issues.

Quick look on carsales just now has shown me at least 5 within the first couple of pages.

thanks, am looking up some in car sales at the moment and am able to find some good cars without a turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...