Jump to content
SAU Community

Recommended Posts

I'm back from overseas and I'm cleaning out the shed to fund my TD06 requirments.

Precision Turbo- Billet comp wheel, PT5557 570hp turbo. Less than 1500km old, some dyno runs and a couple of gymkhana events. This turbo is currently on my rb25/R32 (some may have seen the set up in action at the DEC gymkhana event last year). The car is currntly making 250rwkw with more in it. Dyno sheet and or ride can be arranged.

Turbo- $1000

Wastegate- $350

Stock manifold wastegate adapter- $250

Package- $1400

post-22624-0-11326300-1303213794_thumb.jpg

post-22624-0-52439400-1303213928_thumb.jpg

Nismo 260km/h dash for R32 GTR- 87k kms on the clock. As far as I know it suits early 32's. $250

post-22624-0-87744400-1303214182_thumb.jpg

Generic JJR oil cooler kit- Used condition, but everything is there. $200

post-22624-0-11087000-1303214491_thumb.jpg

Twin td05 kit to suit rb26. Used condition. Manifolds are very well made (japanese) with no cracks. Turbos are in ok condition, minimal shaft play and thrust play. Comes with dump pipes. $1000

post-22624-0-39624000-1303214821_thumb.jpg

post-22624-0-44187700-1303215920_thumb.jpg

Genuine N1 oil pump- new in box. $350

post-22624-0-24168300-1303216067_thumb.jpg

Turbosmart FPR-800 fuel pressure regulator- used but in good condition, includes some fittings. $200

post-22624-0-52879400-1303216490_thumb.jpg

Turbosmart bleed valve- used. cheap. $50

post-22624-0-83061100-1303216172_thumb.jpg

Turbosmart V port blow off valve- used. also cheap. $75

post-22624-0-01295100-1303216251_thumb.jpg

VH45/Q45 V8 90mm throttle body- used but good condition. has no tps but your rb20/25 s1 will bolt straight on. also has coolant temp idle adjustment (cool!). $250

post-22624-0-64101200-1303217339_thumb.jpg

post-22624-0-43772400-1303217462_thumb.jpg

RB Flywheel- used, no cracks. $100

post-22624-0-96239200-1303217572_thumb.jpg

SPEC clutch plate- used. $50

post-22624-0-05424200-1303217925_thumb.jpg

HKS GT 2835- needs a rebuild and the housings are good. $350

post-22624-0-92804700-1303216658_thumb.jpg

post-22624-0-05105700-1303216786_thumb.jpg

RB26 conrods- straight and undamaged. $120

post-22624-0-68668200-1303217680_thumb.jpg

HKS cast low mount exhaust manifold- is don is good, but has a crack along the divider inside... I have had a quote for repair (correctly) for $150 by a cast material welding specialist. Rare item $450

post-22624-0-36837300-1303216891_thumb.jpg

post-22624-0-68263500-1303217004_thumb.jpg

HKS square base wastegate- has bolts, valve seat and gasket. $350

post-22624-0-32401900-1303217109_thumb.jpg

Trust rb26 pod adapters- good condition, needs polishing. $100

post-22624-0-60123800-1303218029_thumb.jpg

Intercooler- generic JJR. $100

post-22624-0-82333200-1303217216_thumb.jpg

Package deals can be made, all shipping will be additional (don't ask for shipping prices unless your very keen) and all parts can be inspected/picked up from south Tasmania- Hobart Area.

PM me here or call/sms 

Cheers

Justin

post-22624-0-42423000-1303216371_thumb.jpg

Cooler sold to me :cheers:

If you are interested in selling that intake pipe in your first Rb25 picture, let me know. Or tell me, is it custom made or bought? If so how much and where from? Maybe you can PM me a pic of your intake system(infront of the turbo)?

Edited by SargeRX8

Sorry the intake pipe isn't for sale... it's just a 90 deg cast trust pipe and a 90 deg alloy bend... there's no provision for bov return or breather intake.

Cheers

Justin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...