Jump to content
SAU Community

Recommended Posts

Today i am finally going to get my learners.. ABOUT TIME HUH! For you who dont know my learners permit expired about a year and a 1/2 ago! :slap:

Ive got lots of money for lessons and im going to try and get it as soon as possable. The only thing that sucks though is the new system.

1. I have to first get my learners

2. driving test with an instructor

3. 25 hours experence driving in a car with an older driver.

4. sit a written test..

and volla.. P's. The 25 hours is going to be a killer though, so lets plan lots and lots and lots of cruzes after i do my driving test :rofl: and that way thoes 25 hours wont take long :rofl:

Anyone just been though this... let me know what the driving test is like and if they question the 25 hours?

So next cruze ill see u with L plates on troys skyline ... :D :kick:

I got my P's through this new system last year, the actual driving test was quite easy, didnt even test me on parallel parking or 3 point turns for some reason even though i learnt it thoroughly, dont know if this is general with all instructors or not.

25 hours wasnt too bad. I spent most of those hours in peak hour traffic and driving at night and rain. When i actually went to submit it, the lady at the counter just skimmed over the pages.. but yeh i know of a lot of people who simply just wrote down hours and not actually doing them. Not saying its a good thing, but yeh they got through it....

Now comes the hazard and perception test which is done on the computer. Just general road knowledge really, go through a video simulation and it will ask you to click the mouse to do certain actions. eg. Click the mouse button when you should slow down etc etc.

They give you a cd with some practise simulations to go through, pretty straight forward

stuff. Havnt heard of anyone failing this test yet, if you do anything wrong they just normally give you a print out with some areas you can work on judging by your results in the test.

Good luck with it all again! :D

Btw i think they are increasing the log book hours to 50 soon so its a good thing your doing it now.

Congrats on L's Kyles :rofl: Cant really say much about new system .... i went thru the old system and it was frighteningly easy ..... driving inspector took me around block and half way thru most of the exercises he goes "yeah, yeah you get the idea" ....no parking nothing .... 15 mins later i had my license and the roads havent been the same since :D

I was on a mine site (back on Leonora) doing vacation experience.

Drove the water truck around the stores twice and got my car and truck licence. Then got on the piss with the copper after work for a few hours.

I am an old bastard 'tho.

yer same I did my test early last year, and it was quite easy, the guy i did my lessons with new the test route soem how so every lesson, would just go do that, and when it came to the test it was quite...well easy, my 25hrs came up very quick, as i drove to training and back from claremont (is 25mins from mien) and so that was 50mins nearly 3-4times a week,

then the HPT, it was quite easy, and it is very hard to fail, you actually have to be very stupid to fail this (but i no someone who did) and well at the end they just give you a print up of what you should practise more of, now that you have got your license

so preety straight forward, good luck.

I've driven in every state in Aus and if the driving ability in general of West Australians is anything to go by then the test will be piss easy! No offence intended (there are some very good drivers in WA as well) but the general knowledge on road rules, simple merging of lanes, parallel/reverse parking and plain common sense driving is definitely lacking, and certainly the worst in Australia. They are passing a bill in WA to impound cars of reckless drivers soon.....I believe they should teach and test them a little better before they let them drive!!

cops are flying and Hell hath frozen over... everyone it's best we sell our lines now, that way we won't have any insurance hassles when trying to claim money after kyles "accidently" bumps us.

AHAHA

just jokes Kyles.... you go girl!!

Great so now you can drop troy off at work and pick him up after work! (Troy don't say i don't do anything for ya)

Thanks everyone .. but i guess it helps if i actually read the book before sitting the test. I am going to re-do it monday. Whopsy missed out by one... they dont get rid of me that easy. I have a book now. The questions i got wrong where because of the way they were written. Oh well.. Just means i wont get a driving lesson this weekend. Roads are saft around joondlaup untill monday :)

I was on a mine site (back on Leonora) doing vacation experience.

Drove the water truck around the stores twice and got my car and truck licence.  Then got on the piss with the copper after work for a few hours.

I am an old bastard 'tho.

sounds like my old man Gav

the copper picked him up from his house (this was the late 1950's) forgot his nite got dad to drive him up to the cop shop to pick up the pad. when they got there the cop was like yeah can drive lets just do the paper work and made walk home haha.

and the sacriest bit about kyles for me is the 'L's will be on my car and i know shes got a lead foot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...