Jump to content
SAU Community

Recommended Posts

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Ya the weather can't get helped glare.gif

Good to see everyone. See those at Winton next weekend then DECA and WRX Sandown after that.

The supra was sporting a sequential gearbox and was seriously moving, also a V8 supercar (spec'd) that got pinged for noise after 2 laps.

We kept it on the black stuff, but one of the GM boys didn't and the armco at turn 3-4 were rearrange a little.

Was good to be back out there, even if after my first exploratory session I was pinged for noise. So didnt even get to put a lap in :( I did go out in the wet in the afternoon but was forced to shift at 3,400rpm due to noise :( But got to put som eheat cycles into the new brakes

Oh well. I had no idea where the correct braking points were and was just trying to bed the brakes. So much harder to pick the braking points compared to Winton. Once they were up to temp I put in two laps to really jump hard on the brakes to get them nice and hot then backed off to let everything cool down.

Was shocked that I did a 1:25 flat. The old girl seems to drive about the same despite the dyno showing I have lost a fair wack of mid range. I reckon if i didnt get pinged for noise it would have been fun chasing the Supra :)

In all it was a trying day, picked up a puncture from a screw in the carpark, Radcam farked up again and didnt get a 90% tilt at a lap....but I think the brakes passed their test and I got some seat time which is drastically needed.

Well done Bris, looks like the old girl has still got it in her. Mate I'd love to see what this thing would do with a decent wheel alignment, quiter exhaust (to be able to go flat out) and more seat time.

Third fastest overall, gotta be happy with that.

Look forward to see how you go next Sunday at Winton...

Was shocked that I did a 1:25 flat. The old girl seems to drive about the same despite the dyno showing I have lost a fair wack of mid range. I reckon if i didnt get pinged for noise it would have been fun chasing the Supra :)

Apparently the Supra is currently a couple of hundred HP down on what it used to be, I have seen it about the traps a few times and thought at a sprint earlier this year that it was not as quick as I remembered. Still no slouch!

I was happy enough with a 1.31 in my coupe given it is effectively the first time I have run it there (Got about ten laps the only other time, stuck behind some nong in a Gemini who was like a snail through the corners and dead set fast in a straight line, and then it rained so hard that they stopped the day) I could certainly have gone a few seconds quicker with a bit more bravery under brakes at the end of the two straights.

I can say that a HR31 on semis is not a lot of fun without power steering, the belt failed in the first wet session so it was armstrong time! It was still managable (Just) so we kept running. But with the rain it made hard work of a twitchy car, 200 odd RWKW at 5600 rpm and seriously snappy onto boost in the rain is sort of attention focussing. Second was virtually unusable, third was inclined to break away at about 4500 rpm and it broke away a couple of times in fouth. Would have been great fun with the PS pump still doing it's thing.

Yep, that would be the one, it used to be an absolute rocket in a straight line, now it is just very very fast. I was told yesterday that it is nearly 200KW down on what it used to have! I have been told in the past that it had around 500KW and given the straight line stomp it had first time I saw it, I would think that was possible!

Interesting way they unload it. It arrives on the back of a flatbed rigid truck parked on top of a steel lifting frame. They hook the truck mounted crane to the frame, hoist the whole lot on to the ground next to the truck and then push the car off on the flat. It would be nice to have money to have toys like that.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...