Jump to content
SAU Community

R33 Nismo Lcd Screen Wiring Help

GTS11

By GTS11,
in Exterior & Interior Styling

 Share

Recommended Posts

GTS11 Apprentice

GTS11

Posted
Posted

Hi Guys,

Please forgive me if i have done this wrong, never posted before.

I have reciently bought a 33 with a nismo lcd dash (not connected to anything) and was wondering if someone can help me out. At the back there is a RCA plug and 2 pins under it, im guessing there for power. Does anyone know which is positive & negitive?

any help would be greatly apreciated!

post-78369-0-54976600-1303749737_thumb.jpg

post-78369-0-53963300-1303749765_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/362118-r33-nismo-lcd-screen-wiring-help/
Share on other sites
GTS11 Apprentice

GTS11

Posted
  • Author
Posted

yeah there is the ej1 and other systems,

I have a deck that plays dvd's and i was going to plug that in through the rca lead to test if the lcd screen works but i think the two pins below are for power and was just wondering if anyone knew which was neg and pos?

Skysthelimit Contributor

Skysthelimit

Posted
Posted (edited)

just to confirm for you, yes those pins are the power to the screen.

I have one of these in my car hooked up to the ej1 unit. But unfortunately off the top of my head I do not recall which of the pins is positive and negative, as mine was all ready to go with a power cable still fitted over them :P

Edited by Skysthelimit
  • 4 weeks later...
bngbng Enthusiast

bngbng

Posted
Posted

Hi i bought one of these nismo lcd cluster, but it only came with the navigation system..does the navigation work in australia and have english? also i have a motec ecu..if i cant find a epson ej1 system am i best off with the HKS CAMP or HKS CAMP2 ? please help if can

thanks

DJSimmo Community Regular

DJSimmo

Posted
Posted

Hi i bought one of these nismo lcd cluster, but it only came with the navigation system..does the navigation work in australia and have english? also i have a motec ecu..if i cant find a epson ej1 system am i best off with the HKS CAMP or HKS CAMP2 ? please help if can

thanks

i had an EJ1 its broken the display chip is faulty and the display is scrambled.

Best bet is to get the HKS Camp 2 and the Nissan Consult harness it works really well and has allot more features compared to the EJ1.

You can also buy optional sensors for the HKS Camp 2 like boost, oil pressure, exhaust temp, oil temp etc

bngbng Enthusiast

bngbng

Posted
Posted

hey ok cool thanks for the help..ill look into the camp2

i had an EJ1 its broken the display chip is faulty and the display is scrambled.

Best bet is to get the HKS Camp 2 and the Nissan Consult harness it works really well and has allot more features compared to the EJ1.

You can also buy optional sensors for the HKS Camp 2 like boost, oil pressure, exhaust temp, oil temp etc

DJSimmo Community Regular

DJSimmo

Posted
Posted

hey ive been reading throu some other post about the hks camp2..will it connect to a aftermarket ecu ?

There is a possability the HKS Camp 2 might work with an aftermarket ecu because HKS offer a CAMP 2 Universal Adaptor which has to be hard wired or soldered onto the ecu wires.

Apparently the Universal Adaptor can pick up the following...

SPEED, RPM, INJECTOR, and THROTTLE

Check out the HKS CAMP 2 FAQ's

http://www.hksusa.com/faq/?ID=3516

bngbng Enthusiast

bngbng

Posted
Posted

ok thanks again for the help will look into it more thanks

There is a possability the HKS Camp 2 might work with an aftermarket ecu because HKS offer a CAMP 2 Universal Adaptor which has to be hard wired or soldered onto the ecu wires.

Apparently the Universal Adaptor can pick up the following...

SPEED, RPM, INJECTOR, and THROTTLE

Check out the HKS CAMP 2 FAQ's

http://www.hksusa.com/faq/?ID=3516

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...