Jump to content
SAU Community

Recommended Posts

The last of my fruity bits from the stagea are listed below; prices do not include post.

Parts are located in regional SA, can deliver to Adelaide for free and can post interstate at buyers expense.

Mike

Garage Impul reclinable Recaro bucket seats with rails. Mint. $1000

Price is firm, that's 500 per side including rails - you can barely get a worn out grubby bride for that and these are genuine optioned Recaros by Impul.

IMG_0068.jpg

Cusco adjustable rear camber arms $250

100_1533.jpg

Cusco adjustable rear toe arms $200

100_1532.jpg

Cusco adjustable front camber arms sprayed 'stealth black' $350

partsround2.jpg

100_1544.jpg

Modified series 2 headlights. $450

CCFL rings, projectors, LED, HID etc (check HERE for more details)

yamazaki0930-img600x450-1297492683hcbfks53632-1.jpg

100_1620.jpg

Couple of sets of series 2 tail lights $250 per set

100_1570.jpg

Carbon fibre look interior trim to suit series 2. 4 pieces. $150

100_1514.jpg

Tanabe trans tunnel brace. $200

Bolts between chassis rails beneath transmission.

P5250107.jpg

Bolts up like this:

bracepic.jpg

Chrome sil panel covers, grey plastic trim. $100

The chrome bits can be pulled off and re-glued to your existing trim if wanted. Average condition.

100_1519.jpg

damn those seats have the same fabric insert as my seats and trims ......hmmmmmmm tempting.

still got the rear cusco arms?

Hi im interested in the sil trims! Do you know a rough price on delivery to Melb? p/c 3166 ( if it helps) Also how do u go about payment?

Cheers Ash

nice 'LESS THAN10' post dickhead... find another set anywhere round the place... if u do... compare condition... these seats are as cuddely as gtrs but as nice to sit in as any luxury car...

pm if ur gna shoot prices... oh and if u wernt aware mikes now living a few hundred ks out of adelaide.. maybe this is a delievery fee increse?

piss of to ur s13

gday

just wondering why the seats are on sale on the silvia forum for $800?

Exactly the kind of thing id expect from people lurking around that place...

I think your questions been answered buddy

Are you even interested in the seats or you one of "those people"?

Are you saying they aren't worth the coin?

What was the purpose of your post?

P.S. M I K E I am currently trying to raise the spondoola for your lights, might take me a bit - hope I'm not too late when I get it together!

Edited by SatchiThaStagea

gday

just wondering why the seats are on sale on the silvia forum for $800?

just sayin... wondering why the price has gone up since october.

http://www.nissansil...howtopic=463001

Cut & pasted from the sales guidelines.:thumbsup:

2. No price debates - put simply if you do not agree with the price being asked, do not comment on the thread. If you believe the seller is asking too much then either pm the thread starter or dont buy the items advertised - simple.

There is to be no "My cousin can get it for much less" or "Your asking too much" comments

+1 for daleo's post. if your goin to sign up to a forum at least read the rules!!

hey Mike, do those impul seats give you a lower seating position than the stock stag seats??

Thanks guys, but it doesn't bother me that he can google the seats etc - if I didn't want that information to be available then it would take 2 seconds to remove. Seats on nissansilvia are mine and yes, they were advertised originally (there and here) for less; as many know I was trying to raise the money to import another car at the time which didn't eventuate, and I'm no longer in a position where I want to give them away/rip myself off. I am more than happy to keep them.

As per initial post, if you want the seats: 'Price is firm, that's 500 per side including rails - you can barely get a worn out grubby bride for that and these are genuine optioned Recaros by Impul.'

Sachithestagea: No worries bud, if you want to check them out in person before hand you'll have to let me know in advance so I can bring them down to Adelaide with me.

Raysboostin: Yep, the seats drop you quite a way from the standard 'bench' seats. I guess it would be comparable to r32 gt-r seats in stagea, or thereabouts?

And Adam is correct, I'm now situated 400k's from Adelaide on a shift roster so please be patient - I'll get to replying to pm's etc when I can

:)

Hey dude,

just wondering where abouts you got the headlights done... drop me a pm when you get this

Much appreciated

if you pm him your details inc name adress number and maybe even look on the northine freight website and see where it your nearest depot. im sure mike will me happy to sort sumthing out.

mike ive used these guys b4, more than welcome to get em to pick em up from mine if needed :)

i did a gearbox for about 200 from vic i think it was... not as big but its fairly heavy...just so u can get an idea i spose

Raysboostin: Yep, the seats drop you quite a way from the standard 'bench' seats. I guess it would be comparable to r32 gt-r seats in stagea, or thereabouts?

roughly how much would say?? 1-2 inches??

Hey,

Still very interested in the sill trims. Might have been overlooked due to the silvia guys dissagreement.

Wondering if they are still available. :)

BLU SKY: apologies mate, I did overlook it. the trims look to be sold to another member pending post cost, but I'll get a price to your post code also in case it falls through.

Raysboostin: I can't give you an exact measurement as I don't have my stagea up here with me - this is the best I can do at the moment, hope it's of some help. measurements are shown from the centre of the mount holes, and the last from the base cushion.

seat1.jpg

seat2.jpg

seat3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...