Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Nice,

But is this really a PC, or is this just a 'mirror, of a connected laptop?

There is probably a small form factor computer under the chair. Its called a carputer. Basic computer connected to the head unit. Looks like he built it him self too. You can buy a empty double din housing off the net, buy a lilliput screen and a itx board with a core2 cpu.

Edited by SargeRX8

Putting together a CarPC is reasonably cheap, I run a VoomPC-2 from mini-box.com in my Stagea, it's about the size of my 500W amp (allows me a bit of extra room for expansion cards) and lives under the passenger seat.

Screens are the expensive bit, or at least they were when I first built mine.. a good quality screen was more than the cost of the PC!

If I was to do it again I would use one of those new USB screens.

As for the software, you don't need NIStune all the time. I have it on there but find that Datascan is easier to use on a daily basis for monitoring and diagnostics.

Because I cbf fitting a carpc back into the Skyline I've been looking at the ECUTalk boxes and find myself leaning that way for this application as it still works with NIStune.

It depends on what you want I guess.

With Nistune you need a Laptop and the Consult-Cable ..

But then it's Gameboy vs. Playstation.

(so not really comparable though both let you play games)

How do you access the connector for the hand controller?

Do you have to remove the car panel in front of the ECU (PFC)?

Here's another 'pro' for Nistune:

PFC for the R33 GTST is really hard to find (and expensive)

Further I think the development of the PFC is dead, Nistune is ongoing with constant software updates and quick support by Mr. Nistune himself ..

Cheers ..

powerfc hand controller imho

easier

works

simple to use

easy to remove or sell or keep in the car

you run a $5 ps2 keyboard extension lead into the hand controller port and just leave the cable coiled up under the carpet

i was always able to find r33 GTST powerfcs either on ebay or car forum people selling at reasonable prices, 1100 max

yeah powerfc is a mature and stable product

plug it in, it works, away you go

the whole car computer imho is fiddgety and way over the top

apexi should have made a logger box for the powerfc but then its starting to venture in markets it didnt need to

so if u want logging you go fc hako or consult

Back then I searched high and low for a GTST version and actually one in eight seemed for the GTST, the rest for GTR.

Nistune has a good 'maturity level', but since with Nistune the functionalities are many, there is always something people

would like to see.

As for data-logging and saving your maps I think that the PFC was too much clutter/boxes you needed to have.

Nistune does it all!

But don't get me wrong the PFC is a nice unit, shame they went belly up - otherwise they might have added an USB-port

and all the other goodies.

:)

you run a $5 ps2 keyboard extension lead into the hand controller port and just leave the cable coiled up under the carpet

i was always able to find r33 GTST powerfcs either on ebay or car forum people selling at reasonable prices, 1100 max

yeah powerfc is a mature and stable product

plug it in, it works, away you go

the whole car computer imho is fiddgety and way over the top

apexi should have made a logger box for the powerfc but then its starting to venture in markets it didnt need to

so if u want logging you go fc hako or consult

Hi there,

I read about this somewhere, though I don't know who eventually bought Apexi up.

Didn't Greddy and Trust go the same way?

And yes, the R33 units are difficult to source and on high(er) demand so prices are up.

(So I went Nistune :))

they are not belly up? you can still buy brand new power FCs to this very day....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...