Jump to content
SAU Community

Tampered Motorsport Track Day

sanjay

By sanjay,
in Archived Events

 Share

Recommended Posts

sanjay Enthusiast

sanjay

Posted
Posted

FWD EMAIL FROM ADAM @ TAMPERED...

"Hi everyone,

Once again, another Tampered Motorsport Track day is coming up. It’s time for us to celebrate the dear Queen’s Birthday with some fun times on the Winton circuit again.

Now, I have had a hard drive fail on me, and have lost a lot of people off the email list. I would appreciate if you could forward this on to all of your friends.

So the details of the day are……

Entry Fee: $160 Including Electronic Timing

Spectators are more than welcome, and there is no cost to come and watch. Also you can go for a ride in the cars but you must sign on with a Passenger indemnity first. Due to the amount of passengers at previous events our insurer has put a small levy on passengers of $20. You can just pay this when you sign the forms at the Scrutineering office.

The day will kick off when scrutineering starts at 7:30am. You will need to do your paper work at the scrutineering office before you have your car checked. Please make sure you have removed all loose items from inside the car.

YOU WILL NEED:

Long sleeve and long pants of non flammable materials i.e. No Nylon

AASA license which can be bought on the day for $50 (these last for 12 months) or CAMS L2S

Closed footwear

Helmet that complies to Australian Standards (has ASA or Snell Sticker)

Car needs to be in a good condition, no oil leaks, no loose items in the car and battery secure.

Good condition tyres

Working seatbelt (give it a pull and make sure it locks)

All people wishing to attend need to make payment to the specified bank account. When you send your email with your details you will be sent an entry form as well as payment details. You will need to email the following details

Full Name:

Email Address:

Mobile Phone Number:

Car Make & Model:

Colour:

Capacity:

Previous best time at Winton:

Forum/Workshop/Car Club you are a part of: (to be listed on Timing Sheet)

SO IF YOU ARE WOULD LIKE TO COMPETE EMAIL YOUR DETAILS TO

[email protected]

Cheers,

Adam"

Link to comment
https://www.sau.com.au/forums/topic/364796-tampered-motorsport-track-day/
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...