Jump to content
SAU Community

Recommended Posts

Basic mods will be enough to get you started sliding like cooler exhuast , some suspension work such as coilovers and a diff shim if you diff is in really bad nick. To get started you will be fine with the power you have at the moment as you get better if you decide to stick with it slowly add more mods to accommodate for your increase in ability when you start to feel your car is holding you back.

For example when you get to the stage you want to be sliding corners in third gear and notice the car might struggle to do it from lack of power you might add want to add some power but yeah as other said just go out see what the car can do and then tweak it for the next time theres no need to begin with a full powerful d1 drift car.

A friend of mine regularly drifts his s14 at winton with a welded diff, coilovers, front mount and exhaust.

Stock power does him fine and car is reliable.

Stick with the bare minimum expenditure, and give it a go to see if you like it.

As an example....

Diff - Free if you can find a friend with a welder.

Coilovers - second hand ones can be had for approx 600

Exhaust - not essential second hand about 150

Front mount - not essential but average 300

Entry fee - 180

Aasa licence per drift day - 50

Tyres - 50-100 per tyre etc

Removing the Hicas by getting a Hicas Lock bar also really helps for drifting.. They go for around $100-150...

And as most of the people are saying the handling mods are more important than just making high power, Without the handling mods your car wont drift smoothly..

I would say go for

1] Hicas Lock Bar

2] Adjustable Coilovers

3] Whitleline Rear Sway bar

And 200kw is good enough to start drifting with, You should learn to control the car before giving it more power..

Power is bad. Most of the time people spin out when trying to drift its because they put down to much power! If you really are suffering from a lack of power then go the cheap option and whack some horrible, skinny tyres on the rear.

As for other mods get a 2-way diff for sure. I'd get coilovers too if you can afford them. Mine doesn't have coilovers and whilst I can kick it out one way and maintain some control, trying to link my drifts up in my yacht up is damn near impossible with stock suspension. It just snaps back so damn hard. Maybe I just suck at drifting.

iv got a 33 now and all it has is a welded diff, compressed springs, fmic, boost controller and mate this thing slides really good. i can can the 33 out better than my old 180sx which had 245kw. learn how to drift in a stock car then if u want power do it later.

so i would say get a fmic, diff and coilovers and ull be fine..

iv got a 33 now and all it has is a welded diff, compressed springs, fmic, boost controller and mate this thing slides really good. i can can the 33 out better than my old 180sx which had 245kw. learn how to drift in a stock car then if u want power do it later.

so i would say get a fmic, diff and coilovers and ull be fine..

lol do you own that yellow one? or that green (or was it orange)? the 2 skylines are like 3 houses away from each other

I'm suprised no one has mentioned a decent seat, it can go a long way and you won't need to worry about your seating position constantly while drifting.

I'd be doing minimal mods at first, consisting of:

Coilovers/shock+spring combo

A decent seat, fixed back will hold alot better obviously

Some form of diff, lockers are very predictable and easy to slide with.

That's the bare essentials, it's better to learn with "not enough" power than too much, it'll teach you throttle control and be pretty forgiving when you slip up.

When you feel you've mastered the car in it's current form (i.e power and lock) then run out and get some inner/outer tie rods (or knuckles) and start bolting some other parts on.

Most of all, have fun with it :thumbsup:

Edited by Run-It-Hard

Absolutely. All the stuff you have can be installed with help on the forums. Don't spend any more cash except on a tune after you install all that good stuff. Then get out and practice.

Bogans have been drifting for many years. I reckon you have to be taught. I am sure people here will offer to do so at the special days.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...