Jump to content
SAU Community

Recommended Posts

Small bumps in the road on corners send my car skitting across the road with a huge shudder through the ass of the car. Possible causes?.... New 18" wheels fitted recently, rear shocks leaking something (not sure what) therefore maybe they are in need of replacement? Am I on the right track with any of this. Its a little disconcerting. I have king springs all round and have had no problems with them since I put them in six months ago. Any suggestions appreciated.

cheers

Link to comment
https://www.sau.com.au/forums/topic/36537-why-is-my-rear-skipping/
Share on other sites

Dude, i had this exact same problem with my car awhile back.. turns out the rear shock absorbers were stuffed.. it stopped working completely. i say more that likele your rear suspension.. go to pedders and get them to do test your shocks.. it only cost $14 or something so worht it i reckon.

go to a decent suspension place(not sure about pedders) and ask them to check it out. most times I have done it at the one near me. they don't charge me to tell me what it is. then if the price is right I get it fixed there.

but yeah it sounds like the shocks are gone, oh well. guess its time for coilovers! :(

Small bumps in the road on corners send my car skitting across the road with a huge shudder through the ass of the car. Possible causes?.... New 18" wheels fitted recently, rear shocks leaking something (not sure what) therefore maybe they are in need of replacement? Am I on the right track with any of this. Its a little disconcerting. I have king springs all round and have had no problems with them since I put them in six months ago. Any suggestions appreciated.  

cheers

My car is doing the exact same thing. Will get my suspension looked at.

Thanks for this thread to all involved.

Yes that's what happened to me, the back would get all jittery around corners and over small bumps. I took out the back suspension and after I undid the pillow mount bolt on one of the shocks to get the spring off the shocky collapsed, I could push it all the way down and it would just stay there and when you lifted it all the way up and jiggled it it would fall down all by it's self.

I had previously taken the car to Pedders and they said that they where soft but other then that they where fine.

I have the same problem when going over small bumps (a good example is going "across" a main intersection where trucks have left big dips in the road). The rear end just sorta skips and I get a light squeel of the rear tyres (only under accelleration).

My rear shocks are only 10mths old, rear tyres are 9mths old and I've got Pineapples fitted.

Do any of you guys get axle tramp under accelleration ?

Yeah I think its the back right shock. Cause when I get under the car and shake the car there is a hell of alot of bumping/knocking going on coming from the shock. Oh well, hope this doesn't phcuk up my skidpan day on sat :devfu:

Anybody wanna sell me a set of rear coilovers?

I have the exact problem you describe, it appeared after a skidpan day. Wheel alignment and wheel balancing cured most of the problem but I still occasionaly get the shuddering.

I got my shocks tested at ABS and they said they are borderline acceptable, I say they are f*cked - every little bump gets picked up and the rear feels floaty. So time for bilsteins I think, or i'm considering getting standard shocks again ($170 each)

Greg just chuck in the bit extra and get Bilseins they are $245 each.

I have the exact problem you describe, it appeared after a skidpan day. Wheel alignment and wheel balancing cured most of the problem but I still occasionaly get the shuddering.

I got my shocks tested at ABS and they said they are borderline acceptable, I say they are f*cked - every little bump gets picked up and the rear feels floaty. So time for bilsteins I think, or i'm considering getting standard shocks again ($170 each)

True, but its not the money thats deterring me from the Bilsteins, its bumpy roads! I think the Bilsteins will be a bit too stiff. But I guess there's only one way to find out. Hmm and then there's the decision of Whiteline vs Bilstein, although apparently they are similar :

craz0 thanks heaps for your help! :D i posted a thread on this topic but no one replied! I'll go ahead with the bilsteins, keeping the standard springs because I need the ride height to clear driveways and bumps etc. thanks again

edit: just looked at your photos and was amazed to see your car is the same colour as mine (paint code KN6, yeah?). yours is the only other skyline i have seen in our purplish/dark grey/charcoal colour! I was beginning to think my colour was a custom order or something :) anyway laters,

sorry for the hijack of thread i recommend you get a wheel alignment and wheel balance for starters, could save you a lot of money.

Slamm, definately sounds like your shocks are rooted. Also coil overs are completely overrated when it comes to road grip, that is unless they are setup correctly and used with the ideal ride height. Sounds like you have good springs already so some good shock inserts for your standard struts would be a cheaper and more suited to your criteria, that is if you want to grip not slip!

Greg, for the roads you travel on, I would recommend a firm spring with a medium gas insert. From experience too firm on the shockers results in too much steering effort.

I am glad that my nismo shocks and springs are still good at 100,000k and when they do give up I hope to get them kitted and reuse them.

Thanks to Prank for fixing the new posts tab, that is probably why Greg's thread went unanswered. :)

thanks for all the input ppl. My shocks are screwed. at least one is. Oil (or fluid whatever) is leaking everywhere. They are standard 33 struts replaced when I got my springs done. I lowered the car a month after buying it and when we pulled the old struts out they were both bent. possibly caused by the car being strapped down tight on the boat over?!! the dealer i bought the car from replaced the old struts with, well, another pair of old struts and six months down the track this is where I am. the handling is shocking atm. just like a boat. will tell you how I fare tomorrow at skidpan day. I know I probably should be wary of going tomorrow but I will make a decision there as to how it feels.

still nobody got some old dusty coilovers or adjustables they want to get rid of? or maybe I should learn a lesson on 2nd hand stuff. you just never know.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...