Jump to content
SAU Community

Recommended Posts

Small bumps in the road on corners send my car skitting across the road with a huge shudder through the ass of the car. Possible causes?.... New 18" wheels fitted recently, rear shocks leaking something (not sure what) therefore maybe they are in need of replacement? Am I on the right track with any of this. Its a little disconcerting. I have king springs all round and have had no problems with them since I put them in six months ago. Any suggestions appreciated.

cheers

Link to comment
https://www.sau.com.au/forums/topic/36537-why-is-my-rear-skipping/
Share on other sites

Dude, i had this exact same problem with my car awhile back.. turns out the rear shock absorbers were stuffed.. it stopped working completely. i say more that likele your rear suspension.. go to pedders and get them to do test your shocks.. it only cost $14 or something so worht it i reckon.

go to a decent suspension place(not sure about pedders) and ask them to check it out. most times I have done it at the one near me. they don't charge me to tell me what it is. then if the price is right I get it fixed there.

but yeah it sounds like the shocks are gone, oh well. guess its time for coilovers! :(

Small bumps in the road on corners send my car skitting across the road with a huge shudder through the ass of the car. Possible causes?.... New 18" wheels fitted recently, rear shocks leaking something (not sure what) therefore maybe they are in need of replacement? Am I on the right track with any of this. Its a little disconcerting. I have king springs all round and have had no problems with them since I put them in six months ago. Any suggestions appreciated.  

cheers

My car is doing the exact same thing. Will get my suspension looked at.

Thanks for this thread to all involved.

Yes that's what happened to me, the back would get all jittery around corners and over small bumps. I took out the back suspension and after I undid the pillow mount bolt on one of the shocks to get the spring off the shocky collapsed, I could push it all the way down and it would just stay there and when you lifted it all the way up and jiggled it it would fall down all by it's self.

I had previously taken the car to Pedders and they said that they where soft but other then that they where fine.

I have the same problem when going over small bumps (a good example is going "across" a main intersection where trucks have left big dips in the road). The rear end just sorta skips and I get a light squeel of the rear tyres (only under accelleration).

My rear shocks are only 10mths old, rear tyres are 9mths old and I've got Pineapples fitted.

Do any of you guys get axle tramp under accelleration ?

Yeah I think its the back right shock. Cause when I get under the car and shake the car there is a hell of alot of bumping/knocking going on coming from the shock. Oh well, hope this doesn't phcuk up my skidpan day on sat :devfu:

Anybody wanna sell me a set of rear coilovers?

I have the exact problem you describe, it appeared after a skidpan day. Wheel alignment and wheel balancing cured most of the problem but I still occasionaly get the shuddering.

I got my shocks tested at ABS and they said they are borderline acceptable, I say they are f*cked - every little bump gets picked up and the rear feels floaty. So time for bilsteins I think, or i'm considering getting standard shocks again ($170 each)

Greg just chuck in the bit extra and get Bilseins they are $245 each.

I have the exact problem you describe, it appeared after a skidpan day. Wheel alignment and wheel balancing cured most of the problem but I still occasionaly get the shuddering.

I got my shocks tested at ABS and they said they are borderline acceptable, I say they are f*cked - every little bump gets picked up and the rear feels floaty. So time for bilsteins I think, or i'm considering getting standard shocks again ($170 each)

True, but its not the money thats deterring me from the Bilsteins, its bumpy roads! I think the Bilsteins will be a bit too stiff. But I guess there's only one way to find out. Hmm and then there's the decision of Whiteline vs Bilstein, although apparently they are similar :

craz0 thanks heaps for your help! :D i posted a thread on this topic but no one replied! I'll go ahead with the bilsteins, keeping the standard springs because I need the ride height to clear driveways and bumps etc. thanks again

edit: just looked at your photos and was amazed to see your car is the same colour as mine (paint code KN6, yeah?). yours is the only other skyline i have seen in our purplish/dark grey/charcoal colour! I was beginning to think my colour was a custom order or something :) anyway laters,

sorry for the hijack of thread i recommend you get a wheel alignment and wheel balance for starters, could save you a lot of money.

Slamm, definately sounds like your shocks are rooted. Also coil overs are completely overrated when it comes to road grip, that is unless they are setup correctly and used with the ideal ride height. Sounds like you have good springs already so some good shock inserts for your standard struts would be a cheaper and more suited to your criteria, that is if you want to grip not slip!

Greg, for the roads you travel on, I would recommend a firm spring with a medium gas insert. From experience too firm on the shockers results in too much steering effort.

I am glad that my nismo shocks and springs are still good at 100,000k and when they do give up I hope to get them kitted and reuse them.

Thanks to Prank for fixing the new posts tab, that is probably why Greg's thread went unanswered. :)

thanks for all the input ppl. My shocks are screwed. at least one is. Oil (or fluid whatever) is leaking everywhere. They are standard 33 struts replaced when I got my springs done. I lowered the car a month after buying it and when we pulled the old struts out they were both bent. possibly caused by the car being strapped down tight on the boat over?!! the dealer i bought the car from replaced the old struts with, well, another pair of old struts and six months down the track this is where I am. the handling is shocking atm. just like a boat. will tell you how I fare tomorrow at skidpan day. I know I probably should be wary of going tomorrow but I will make a decision there as to how it feels.

still nobody got some old dusty coilovers or adjustables they want to get rid of? or maybe I should learn a lesson on 2nd hand stuff. you just never know.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...