Jump to content
SAU Community

Recommended Posts

  • Replies 3.6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You will find that some wheels just do not allow for normal nuts, Jose. Well in my case you couldn't fit a normal wheel nut as there almost no gap for the brace to go on. Hence why I changed to the Key hole nut system. Bought them for $40 for all 4 wheels with lock nuts. Have not had a problem with them ever.

i bought some WORK billet nuts, they were expensive. but with the Nismo rim's i've got they're the only ones that fit in the small holes.

i also use a thin wall impact socket, and i even have to take off the plastic outside to fit the socket in the hole.

the ones that came with the rims were in pretty bad condition, almost rounded off so i was due for some new ones.

around 60hrs in the withdrawal atm. feel pretty sketchy, anxious etc. too uncomfortable to sleep :/

got to go through it & just get past the next few weeks

once Im out the other side & past the addiction Im going to commit myself to actually being something

radiologist is the long term goal; have to dedicate myself to study. I know I can do it so its a matter of one step at a time.

yep suck it if u go to a organised event with a bunch of ferrals and dont expect to cop a sticker for ya fully sick vp dumped on its ass ,blind freddy could see that this was going to happen :domokun:

like it or not stereotyping is a fact of life and commodore owners just cop it .............didnt say holden owners cause thats not true ..............gazzanats cruise was on last sat night didnt see any defects there. and who wouldnt of worked out that last year they got bent over so what woud be different this year???? forget already?

iam a +1 for any charity work good on em but if u really thought that it was just gunna be a peacefull cruise u got to be kidding ,i mean i dont think they gave the cops enough credit all those potential defects in one place ud be dumb not to, talk about job done for ya pinch.gif

I was referring to pepsinators pics of cars after your comments - Scarlett naked is far more important thatn pics of cars ... :wub:

Edit: okay, I'm confused - got an email saying heslo said the pics were legit ... Was responding to that ... But doesnt seem to be here ...

heslo has just posted a reply to a topic that you have subscribed to titled "The Wasteland 2011 Edition".

----------------------------------------------------------------------

They are her Jenna

----------------------------------------------------------------------

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...