Jump to content
SAU Community

Recommended Posts

This thread needs some photos for those who dont get to see many dry sump setups or have never seen one.

Sorry the photos are not the greatest quality but they do show the dry sump.

Its a tight layout with a 5 stage system. These are of an RB26 in a GTR

gallery_20349_4609_136868.jpg

gallery_20349_4609_10009.jpg

gallery_20349_4609_101399.jpg

gallery_20349_4609_17966.jpg

gallery_20349_4609_50521.jpg

gallery_20349_4609_41454.jpg

gallery_20349_4609_141821.jpg

gallery_20349_4609_70613.jpg

gallery_20349_4609_31592.jpg

gallery_20349_4609_140270.jpg

And the boot with tank and some of the breathing system.

gallery_20349_4609_183874.jpg

It is a pretty well sorted car, the owner has put alot into it.

The mentality has been, right way or no way from the beginning.

A few things still to change and tidy up, if I was to build another GTR for myself I'd use alot of the same componentry.

cool, ill have a hunt around for some pics.

unrelated to the dry sump topic but still oil related, I'll be giving you a bell re: a extended sump for my Soarer...just gotta check I can get the pan off with the motor in the car and how much room I have

The pressure stage is usually at the rear of the pump, it's a separate section that's sealed from the scavenger stages.

It's normally at the rear so the rear bearing plate can incorporate a pressure relief valve.

The new Peterson range also have a bypass valve that returns the excess pressure into the scavenger stage instead or returning it to the inlet of the pressure stage.

There are for and against for both types but the new petersons seem to work okay.

Mike I'll send you a different number you can get me on now.

  • 1 month later...

Very nice choice.

In the next few weeks I'm hoping to test out one of my "behind closed doors projects"

An integral pump/pan with internal scavenging galleries using a similar Dailey pump that mike is using.

Working on the drive system still which will be via a multi row chain internally from the unused factor pump drive section of the crank.

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...