Jump to content
SAU Community

Recommended Posts

hi im just upgrading my gt35r on my rb26/30. im looking into the 6765 precision turbo, i like the specs of the turbo and its great the fact i dont have to change to a t4 flange. ive heard a lot of good things about these turbos. has anyone used these on an rb30 and can give some feedback on housings and so forth? im aiming round the 700hp with not having a big lag monster i think will be ideal. any ideas are welcome thanks?

Edited by cribba
Link to comment
https://www.sau.com.au/forums/topic/365779-6765-precision-turbos-on-rb30/
Share on other sites

I have seen, in person, not just heard about 35R's being just out of puff at over 400rwkw for extended periods of use.

Now, I love the turbo. I still believe that a 35R is the perfect balance between response and reasonable power output.

What I also believe is that when pushed for extended periods at power levels at above 400rwkw a 66mm compressor turbo is a better choice.

Its not that the 35R cant do it, its that you have to really push the turbo to do it for extended periods.

Now, 400rwkw means= 400rwkw on a dyno dynamics dyno, in the correct shootout mode, in this case 6F with the air temp sensor hanging up on the wall not in the engine bay.

EGT's also under 800C normally 750C just to ensure the longevity of the turbo. The correct fuel used for the application.

I could easily make 450rwkw on the dyno with air temp in the engine bay and in some random ramp rate but thats hardly comparing apples with apples.

I havent done back to back on a 6765 but I can tell youi that a 37-88 is a much better setup for over 400rwkw, Has almost (within 300rpm) the same responce as a 35 with .8 rear.

I have even tried a plain bearing 66mm with a .64 T4 rear housing. Tiny litle bit more lag than a 35r with .8 on a 26 but has the scope for 450rwkw.

For under 400rwkw the 35 is a perfect turbo :)

hey guys there was nothing wrong with the 35r dont get wrong it was a great turbo. but i no if i kept pushing it too what it was going it might do damage. thought i would upgrade to something a little larger and not work it as hard. i was pushin out round the 400kw. good power for that turbo. i am thirsty for a little power and have something reliable. it doesnt get driven on the street much now more a track car. does anyone no the exducer size of the compressor wheel on a 6765? i heard there the same size as a to4z just want to double check?

hey guys, look theres nothing wrong with the 35r, i was more than happy with it. but i didnt want it to let go pushing it all the time. i was making round 400kw. i would like to get something a little larger and not push it as hard. the car doesnt get driven on the street much anymore, more a track car. does anyone no the exducer size of the compressor wheel on a 6765? i heard they are the same as a t04z just wanted to double check? thanks for help

yeah its good mate still waiting on parts tho :( seriously tho is the gtx too expensive ?? its got another 150hp over the one u have, and will bolt straight on to your existing dump, mani, oil/water lines intake etc etc. by the time u modify everythin to fit the precision u will probably have spent the same.

thanks to mico, found the spec on the wheels of the 6765. compessor wheel 65mm inducer 87.5mm exducer. turbine wheel- 74mm inducer 65mm exducer. similiar specs to a to4z. should come on boost similiar to the 35r id say

67mm compressor inducer.

I have a 6765 in the forsale section atm although its a T4 version so not much good in this situation.. From my research this turbo will be a far bit lazier than a 35R it will be comparable to a t04z and make GT4294 power.. If mine doesnt sell shortly ill have some results to post up in the next month or so. Will be able to compare my old twin hks 2530's setup on a built 2.6 to 6765 .81 6boost T4 open manifold.. :yes:

The PT6765 is quite a bit laggier than a GT35R, they're more comparable with a T04Z. Even the smaller Precision PT6262 is laggier than a GT35R, though would also be a bit of an upgrade.

The GT3794R seem like an awesome piece of work though is again laggier than GT3582R, would be my pick of the bunch though :)

67mm compressor inducer.

I have a 6765 in the forsale section atm although its a T4 version so not much good in this situation.. From my research this turbo will be a far bit lazier than a 35R it will be comparable to a t04z and make GT4294 power.. If mine doesnt sell shortly ill have some results to post up in the next month or so. Will be able to compare my old twin hks 2530's setup on a built 2.6 to 6765 .81 6boost T4 open manifold.. :yes:

that sounds great mate, good luck with yours

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...